Calculate the ph of a 1-l solution containing sodium acetate

Assignment Help Civil Engineering
Reference no: EM13298322

Calculate the pH of a 1-L solution containing 0.01 M sodium acetate after the addition of 3 mL 0.5 M H2SO4?

Reference no: EM13298322

Questions Cloud

What is the effective annual interest rate on this lending : what is the effective annual interest rate on this lending arrangement?
Explain the adiabatic reversible expansion of an ideal gas : Show that for the adiabatic reversible expansion of an ideal gas, T1^(Cv/R)V1 = T2^(Cv/R)V2
How is the spent carbon removed from the pressure contactors : Testing has already been completed on the water and the Usage Rate for the carbon is 0.4 pounds of carbon per 1000 gallons of water treated. The required EBCT is 20 minutes and the carbon longevity must be at least 6 months.
What emf is induced across the wings : a metal airplane flies horizontally at 200. m/s where the Earth's magnetic fiels is vertical and is 45.0uT. If the wingspan is 25.0 meters. what emf is induced across the wings
Calculate the ph of a 1-l solution containing sodium acetate : Calculate the pH of a 1-L solution containing 0.01 M sodium acetate after the addition of 3 mL 0.5 M H2SO4
Determine the manning coefficient of channel roughness : A discharge of 2,200 ft^3/sec flows in a trapezoidal channel at a normal depth of 8.0 ft. The channel has a slope of 0.01, a 12-ft bottom width, and side slopes of 1:1 (H:V). Determine the manning coefficient of channel roughness
Which stock would you consider to be riskier : You have estimated the following probability distributions of expected future returns for Stocks X and Y.
Design an earthen channel section into sandy soil : An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.
Calculate the annual rate of depreciation : In two year you need to earn 3000$ if you get an interest rate of 15.75% compound annually, how much do you need to invest now

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the concentration of pce in the lake

An industry discharges PCE (tetrachloroethene, tetratchloroethylene, or perchloroethylene) into a small, well-mixed lake. The influent concentration is 0.4mg/L and the hydraulic residence time of the lake is 5days.

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

  Finding the gallons of mercury

How many gallons of mercury (sg=13.54) would weight the same as 5 gallons of castor oil which has a specific weight of 56.69 pcf?

  What percent removal of organic matter

If the BOD5 of the river below the mill outfall must not exceed 5 mg/L, what percent removal of organic matter (BOD5) is required by the mill to meet this requirement?

  What is the main objective of nasas mars science laboratory

Q. What is the main objective of NASA's Mars Science Laboratory (MSL) mission? When was it launched and when and where is it scheduled to land on Mars? Explain the major differences between this mission and Mars Exploration Rovers (MER) mission?

  Determine the normal and shear stresses

The grains of wood in the board make an angle of 20 degrees with the horizontal as shown. Determine the normal and shear stresses that act perpendicular and parallel to the grains if the board is subjected to an axial load of 250 N.(Dimensions l=3..

  Determine net gain or loss in reservior storage as volume

A 175 Mi^2 watershed has a 4200 acre reservior within its boundary . The annual watershed runoff to the reservior is 13in. A flow of 120 mgd (368 ac-ft/day) is to be drafted from the reservior. The annual rainfall is 38in.

  What is the design storage and water surface elevation

What is the design storage and water surface elevation at the peak outflow rate and estimate the long-term average reduction (EPA, 1986) in particulates under dynamic conditions.

  Find the final speed

Two carts with masses of 4.72 kg and 2.84 kg move toward each other on a frictionless track with speeds of 4.86 m/s and 3.97 m/s respectively. The carts stick together after colliding head-on. Find the final speed.

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

  Calculate the speed of the car at the onset of skidding

A car collided with a telephone pole and left 20 ft skid marks on the dry pavement. Based on the damages sustained, an engineer estimated that the speed at collision was 15 mph. If the roadway had a +3% grade, calculate the speed of the car at the..

  Determine using energy methods speed of crate after moving

The coefficient of friction between the crate and the floor is µs = 0.4 and µk = 0.3. If P is slowly increased until the crate starts to move and then remains constant, determine using energy methods the speed of the crate after moving 2 m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd