Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A froth flotation process is used to concentrate copper ore. It is a two stage process with a rougher stage followed by a cleaner stage. The cleaner tailings are returned to the rougher flotation. Both stages are non-reactive unit operations and both operate at steady-state. the analytical profile of the entire flotation circuit is:
The rougher flotation feed grade is 0.50%CuThe rougher concentration grade is 11.9%CuThe rougher tailings conain 0.10%CuThe final cleaner concentrate grade is 33.0%CuThe cleaner tailings contain 4.5%Cu
a. Calculate the overall copper recovery for this process.
b.Calculate the copper recovery inthe cleaner flotation operation.
c. assuming the flotation process treats 75 tons/hr of copper ore, calculate the circulating load (in tons/hr) of cleaner tailings that return to the rougher flotation under steady-state operation.
The maximum speed of trains for urban rail transit is 60 mph and maximum acceleration/deceleration rates allowed for standing passengers are 5 feet/sec2. Part A) If the station spacing is determined at 1000 ft, what is the maximum average running s..
Argon gas is heated in a constant pressure process from 20.0 to 500.°C. Assuming ideal gas behavior, determine: a. The ratio of the final to initial volumes. b. The change in specific internal energy. c. The change in specific enthalpy of the argon.
Sketch and annotate the wedge described above.
A driver is traveling 68 mi/h on a road with a -3% grade. There is a stalled car on the road 1000 ft ahead of the driver. The driver's vehicle has a braking efficiency of 90% and anti-lock brakes.
A laser range finder consists of a laser and a light receiver. It operates by bouncing a laser pulse off a mirror and measuring the time of flight, the time it takes for the pulse to leave the laser, bounce off the mirror and return to the receive..
A $325,000 bond has an interest rate of 8.4% but if the bond experiences an inflation rate of 8.6% what will be the profit be after 4 years
a section of highway has the following flow- density relationship: q= 50k - 0.156k^2 what is the capacity of the highway section, the speed at capacity, and the density when the highway is at one-quarter of its capacity
To protect the channel from erosion, the normal flow velocity for the design discharge has to be reduced to 7.0 fps or below, and the flow Froude number must be reduced to 0.80 or below.
Determine the maximum service load W (kips) at the mid-height of the beam-column shown in the accompanying figure 2.1. Assume the member is hinged with respect to bending in both x and y directions at the top and bottom.
A simple curve has a central angle of 42degreess. A point Y is located 24m from the vertex and has a perpendicular distance of 3.00m from the back tangent.
Design a horizontal curve with a 40-degree central angle (delta=40) for a two-lane road with 11-ft lanes. The design speed is 70 mi/h and superelevation is limited to 0.06ft/ft. Give radius, degree of curvature, and length of curve
What power must the pump supply to the system to pump the oil from the lower reservoir to the upper reservoir at a rate of .2 m^3/s. Sketch the HGL and the EGL for the system.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd