User Account

All Pages

Calculate the maximum electric filed inside the junction

Assignment Help Electrical Engineering
Reference no: EM13255178

A uniformly doped abrupt p-n junction (step junction) diode is fabricated. At room temperature 25% of the total space charge region (depletion region) is in the p region. The built in potential is also measured to be 0.710V. a) Calculate the dopant concentration, b)Size of the space charge region at n side and the p side, c) Calculate the maximum electric filed inside the junction?

Reference no: EM13255178

Questions Cloud

Write an essay about solar energy : Need essay to be about solar energy and the role of science and technology with respect to it. Also the impact solar energy has on the society.
What is the separation distance of the sources at the height : The thickness variation must be within ±10% across the substrate. Your evaporation chamber consists of two sources separated by a distance D and the substrate is at a height h from the sources.
What is the peak voltage across the inductor : An AC generator supplies an rms voltage of 240 V at 60.0 Hz. It is connected in series with a 0.450 H inductor, a 3.90 ?F capacitor and a 316 ? resistor. What is the peak voltage across the inductor
Explain the standard enthalpy of formation of hf : at 25c the standard enthalpy of formation of HF(aq) is -320.1 kj/mol. of OH(aq) it is -229.5Kj/mol. of F (aq) it is -329.5 Kj/mol.of H2O(l) it is -286.1Kj/mol.
Calculate the maximum electric filed inside the junction : A uniformly doped abrupt p-n junction (step junction) diode is fabricated. At room temperature 25% of the total space charge region (depletion region) is in the p region. The built in potential is also measured to be 0.710V.
How fast can the turn be made without causing car to slide : A car of mass 1500kg is driving across a flat parking lot (u=0.3), How fast can the turn be made without causing the car to slide
What is the rate of change of total charge within volume : Within a region with volume 2.1 m^3, J=xhat*3.2*x A/m^2. What is the rate of change of total charge within the volume (in C/s)
Use median mode mean and why : Provide unique examples of where you would use median, mode, mean, and WHY
Find the spring constant : An oscillating block-spring system has a mechanical energy of 1.00 J, an amplitude of 9.9 cm, and a maximum speed of 1.13 m/s. Find the spring constant

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What type of transistor to use at the front end of reciever

A class C amplifier severely distorts the signal. How can we use a resonant tuned filter to get the desired signal at the output What type of transistor (BJT or FET) would you like to use at the front end (first amplifier) of a receiver

  Determine frequency range of local oscillator for reciever

a) Determine the frequency range of the local oscillator for this receiver b) Analyze and explain whether it's possible for this reciever to receive both a diesred AM station and an image station within the same 31-meter band

  What is the likely problem and the recommended solution

The air feels humid. No air is coming from the registers. The air handler is in the attic. An examination of the condensing unit shows that the suction line has ice all the way back to the compressor. The compressoris still running.

  Determine the transfer function of the rlc circuit

Determine what kind of filter (low pass, high pass, bandpass, or band stop) the circuit represents. Briefly justify your answer. Confirm by computing the Bode plot using MATLAB and paste the graph below.

  Does the higher potential need to be negative or positive

Two charges are held fixed in an x-y plane. Charge Q=-1*10^-9 C is located at the origin, q=3*10^-9 C is located at (0,2). Determine the voltage (v_ba) between point 'b' located at (3,0) and point 'a' located at (1,0).

  Determine if there is a difference in compression strength

An engineering statistician wants to conduct a test to determine if there is a difference in the compression strength of two different manufactures of reinforced concrete columns.

  Calculate the core parameters rc and xm

The open circuit test on a single-phase 15kVA, 7500/480 V, 60 Hz distribution transformer yielded the following: V = 7500V; I = 0.2006A; P = 180W Calculate the core parameters RC and XM and the magnetizing current IM.

  What is the channel length modulation parameter

An n-channel MOSFET has a thershold voltage (Vt) of 0.5 V and a width to length ratio (W/L) of 2. If the tansistor generator the curve bleow when the gate to source voltage (VGS) is 1.5V. I D = 0.12mA. VDS = 0.5 V.

  Discuss initial approach to designing and defining the site

A critical aspect of web design is the approach that you take to define and develop the parameters of your site. This includes your review and assessment of your own work to validate your site to make sure that it meets the needs of your client.

  What size capacitor should be placed in series

what size capacitor should be placed in series with the series combination of 800 ohms and 20mH to give an admittance whose magnitude is 1m/ohm at w=10k rads/s

  How a diameter two times smaller affects the resistance

What is the resistance of an annealed copper wire that has a length of 500m and a diameter of 0.5 mm. How a diameter two times smaller affects the resistance.

  Define a design of a series controller

Design a series controller (a PD, PI or PID) so that the following performance specifications are satisfied. Steady-state error due to a step input = 0

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd