Calculate the maximum and minimum possible dry unit weights

Reference no: EM13555098

For a sand, the maximum and minimum possible void ratios were determined to be 0.94 and 0.33 respectfully. Find the moist unit weight of sand in lb/ft^3compacted in the field at a relative density of 60%and moisture content of 10%Given Gs=2.65. Also calculate the maximum and minimum possible dry unit weights that the sand can have.

Reference no: EM13555098

Questions Cloud

What it the distance after adjusting for sag : A 200ft tape is hung in catenary. It is supported at the 80ft mark the tension is 20lbf and the weight of the tape is 3 lbf 5 0z. The measured distance is 187.01 what it the distance after adjusting for sag?

What will be the concentration of tce in the aqueous phase : The dimensionless henry's constant for TCE at 25 degrees celsius is 0.4. A sealed glass vial is prepared that has an air volum of 4mL overlying an aquesous volume of 36mL. TCE is added to the aqueous phase so that initally

Determine which driver will be the first to displace later : Vehicles A and B are traveling toward each other in the opposing lanes on a straight segment of a two-lane highway at 35 and 40 mph respectively. If the critical rates of angular change of the two drivers are 0.0065 and 0.0055 rad/s, determine

Determine whether it has an fcc or bcc crystal structure : Rhodium has an atomic radius of 0.1345nm and a density of 12.41g/cm^3. determine whether it has an FCC or BCC crystal structure.

Calculate the maximum and minimum possible dry unit weights : For a sand, the maximum and minimum possible void ratios were determined to be 0.94 and 0.33 respectfully. Find the moist unit weight of sand in lb/ft^3compacted in the field at a relative density of 60%and moisture content of 10%Given Gs=2.65

Compute the void ratio porosity degree of saturation : A cube of moist soil weighs 330 lb and has a volume of 3.00 ft3. Its moisture content is 27.0% and the specific gravity of solids is 2.72. Compute the void ratio, porosity, degree of saturation, unit weight and dry unit weight of this soil.

A small portion was removed and a moisture content test : An undisturbed cylindrical soil sample is 2.4 in. in diameter and 6 in. long. It has a weight of 1.95 lb. After finding the weight of the entire sample, a small portion was removed and a moisture content test was performed on it. The results of this ..

Select and apporpriate value of gs for this soil and compute : The total density of a moist soil was determined to be 1760 kg/m3 when its water content was 10.0%. Assume the specific gravity is 2.7. Given this information, determine (a) the phase diagram of the soil, (b) the void ratio, (c) the porosity, (d) the..

Compute the void ratio porosity initial moisture content : A soil initially has a degree of saturation of 95% and a unit weight of 129 lb/ft3. It is then placed in an oven and dried. After removal from the oven, its unit weight is 109 lb/ft3. Compute the void ratio, porosity

User Account

All Pages