Calculate the mass flow rate of moist air

Assignment Help Mechanical Engineering

Reference no: EM13708231

A non-reacting gaseous mixture with molar analysis of 74.3% N2, 4.3% O2, 7.1% CO2, and 14.3% H2O(g) enters a counter-flow heat exchanger at 800?F and 1 atm with a volumetric flow rate of 5 ft3/s (State 1) and exits at 200?F (State 2). A separate moist air stream enters the heat exchanger at 60?F, 1 atm, and relative humidity 30% (State 3) and exits at 100?F (State 4).

a) Show the process for moist air on psychometric chart. Label states 3 and 4.

b) Calculate the mass flow rate (lbm/s) of moist air.

c) Determine the volumetric flow rate (ft3/s) of moist air at the inlet and at the exit.

Reference no: EM13708231

Questions Cloud

Determine the mass of oil in the tank : A curde oil storage tank the tank initially contains 1000m^3 ofcrude oil. Oil is pumped into the tank through a pipe at a rate of 2m^3/min and out of the tank at a velocity of 1.5m/s through another pipe having a diameter of 0.15m. the crude oil has ..

Coaching model : "Coaching Model" acronym, create your own coaching model, and define the meaning of each letter as it relates to performance management. Specify the primary reasons that you believe your model would be effective. Justify your response.

Develop a preliminary design : Develop a preliminary design, including flow rates, pipe sizes, and pipe slopes for a trunk sewer to be laid in the development shown in the accompanying figure from 6th to 1st Streets along Peavy Avenue

Calculate the pressure at the nozzle exit : Moist air at 35 degree C, 3 bar, and relative humidity 30% (State 1) enters a nozzle with a velocity of 50 m/s and expands in a reversible and adiabatic process such that the moist air leaving the nozzle is about to condense (State 2). Calculate the ..

Calculate the mass flow rate of moist air : A non-reacting gaseous mixture with molar analysis of 74.3% N2, 4.3% O2, 7.1% CO2, and 14.3% H2O(g) enters a counter-flow heat exchanger at 800?F and 1 atm with a volumetric flow rate of 5 ft3/s (State 1) and exits at 200?F (State 2). Calculate the m..

How long will it take for half of the water to drain out : An open cylindrical tank that is 2 ft in diameter and 4 ft high is full of water. If the tank has a 2 in diameter hole in the bottom, how long will it take for half of the water to drain out, if friction is neglected?

Electronic components of computer are cooled by air flowing : The electronic components of a computer are cooled by air flowing through a fan mounted at the inlet of the electronic enclosure. At steady state, air enters at 18oC, 1 atm. For noise control, the velocity of the entering air cannot exceed 0.9 m/s. F..

Determine the velocity of the water at the inlet and exit : A pump is employed to deliver liquid water from a pond to a higher elevation. The pump steadily draws water from the pond at a volumetric flow rate of 192 gal/min through a pipe having a 7 in diameter inlet. The exit diameter of the pipe is 2 in. and..

Show the specs of bearers and joists : You need to park a car under it so there can be no supports in the middle. Attached to the wall on one side and steel post on the other.

User Account

All Pages