Calculate the mass and density of methane gas

Reference no: EM13253805

calculate the mass and density of methane gas contained at 1000 psia and 68 degrees Farenheit in a cylinder with volume 3.20 cu ft. Do not assume that methane is an ideal gas. Compare values for ideal gas. Please show formula.

Reference no: EM13253805

Questions Cloud

What is the fundamental frequency : Standing waves on a 1.7m -long string that is fixed at both ends are seen at successive frequencies of 36 Hz and 54Hz. What is the fundamental frequency

Determine probability that the sequence is received in error : A sequence of 10 bits is transmitted over a binary symmetric channel with bit error probability Pe. Assume that bit errors occur independently. The sequence is considered to be received in error if more than two bit errors occur.

How do you use the ryley theorem : How do you use the Ryley theorem in the case of an out-of-control DOODLEBUG business to manage the output?

Explain what is the collision frequency : A gas mixture contains H2 at 2/3 bar and O2 at 1/b bar at 298 K. The diameters of H2 is 0.272 nm and O2 is 0.360 nm. What is the collision frequency \(Z_{12}\) of a hydrogen molecule colliding with oxygen molecule

Calculate the mass and density of methane gas : calculate the mass and density of methane gas contained at 1000 psia and 68 degrees Farenheit in a cylinder with volume 3.20 cu ft

What is the limit on leakage resistance for the capacitor : The dielectric materials used in real capacitors are not perfect insulators. A resistance called a leakage resistance in parallel with the capacitance can model this imperfection. A 150-F capacitor is initially charged to 100 V.

Explain the molecular formula of the compound : A 0.08468 g sample of gas occupies 10.0-mL at 291.0 K and 1.10 atm. Upon further analysis, the compound is found to be 13.068% C and 86.932% Br. What is the molecular formula of the compound

Is the packaging process capable : The target process capability ratio is 1.33. The production manager has just learned that the packet-filling process average weight has dropped down to 85.0 grams. Is the packaging process capable? Is an adjustment needed?

What is the rate of heat loss throug the wall : The wall of a house consists of three layers: a wooden outer wall with an R factor of 1.0, a 3in layer of fiberglass insulation with an R factor of 11, what is the rate of heat loss throug an 8ft by 15ft section of this wall

User Account

All Pages