Calculate the linear density of atoms in these directions

Assignment Help Civil Engineering

Reference no: EM13542303

1.A coal-burning steam power plant produces a net power of 300 MW with an overall thermal efficiency of 32 percent. The actual gravimetric air-fuel ratio in the furnace is calculated to be 12 kg air/kg fuel. The heating value of coal is 28,000 kJ/kg. Determine (a) the amount of coaal consumed during a 24-hour period and (b) the rate of air flowing through the furnace.

2.For FCC diamond cubic structures, give the lattice coordinates for the atoms found in the [100], [110], [111] direction? and Calculate the linear density of atoms in these directions for Ge.

Reference no: EM13542303

Questions Cloud

Will the quantity of coarse aggregate increase decrease : A concrete mix with a 3-inch slump, w/c ratio of .50, and sand with a finesse modulus of 2.4 contains 1700 lb/yd^3 of coarse aggregate per cubic yard. To adjust the mix so as to increase the compressive strenght

Describe how edge dislocations move under an applied : In the context of JCT 2005, to what extent can a subcontractor negligently set fire to an existing building with impunity?

When the pressure in the tank reaches the valve is closed : Steam at 800 kPa and 300 C is bled off from a large supply line, passed through a valve, and allowed to enter an initially evacuated, uninsulated tank with a volume of 0.3 m3.

Apply corrections for temperature pull and sag to determine : What is the water content and liquidity index of the fines in compacted mass?A civil engineer used a 30-m tape in measuring an inclined distance. The measured length on the slope was recorded to be 459.20 m long.

Calculate the linear density of atoms in these directions : For FCC diamond cubic structures, give the lattice coordinates for the atoms found in the [100], [110], [111] direction? and Calculate the linear density of atoms in these directions for Ge.

Determine the correct horizontal distance considering : A civil engineer used a 30-m tape in measuring an inclined distance. The measured length on the slope was recorded to be 459.20 m long. The difference in elevation between the initial and the end point was found to be 1.25 m

Draw the influence line for the shear at point b : Draw the influence line for the shear at point B. Plot numerical values every 5 ft. Assume the support at A is a roller and C is fixed. EI is constant.

Determine the shear force and bending moment diagrams : A wood mallet has a cylindrical head 6 inches long and 3 inches in diameter. If the cylindrical head is 1 inch in diameter how long must it be for the mallet to balance at a point 6 inches from where the handle enters the mallet? (use 40 lb / ft cube..

What rate of perspiration would be needed to maintain a : Considere a person who consumes 2100 kcal par day, of which 2000 kcal is converted thermal energy.( the remaining 100 kcal is used to do work on the environment.) The person has a surface area of 1.8 m² and is dressed in a bathing suit.

User Account

All Pages