Calculate the high risk use the one hit assumption

Assignment Help Civil Engineering
Reference no: EM13564817

The recommended threshhold limit value ( TLV-ACGIH) air concentration for occupational exposure to water-insoluble hexavalent chromium Cr (VI) is 0.01 mg/M^3. this concentration is based on an assumption that the individual is generally healthy and is exposed for 8 hours per day over a working lifetime ( that is from age 18 to 65 years). assuming a body weight of 78 kg and an inhalation rate of 0.63 m^3/h over the working life of the individual, a. what is the lifetime (75y) CDI? b. estimate the low-dose cancer risk from occupational inhalation exposure to hexavalent chromium. c. calculate the high risk, use the one hit assumption of Cr (VI) as cacinogen

Reference no: EM13564817

Questions Cloud

At what minimum speed would it escape : Mars is 2.28 x 1011 m from the sun (on average). At what minimum speed would it escape from the sun completely
What is the tp concentration in the lake one week after the : Over a long period, total phosphorus (TP) has been discharged to a lake through sewage and surface water runoff at a rate of 10 tons/day. Measures were then taken to reduce the TP load to 1 ton/day.
Find bad arguments : what we can do in order to find bad arguments and make sure not to be swayed by them.
Determine power developed in mw taking load factor as unity : Select a pump to be used to supply water to a reservoir at a flow rate of 30 L/sec. The elevation head is 20 m and the distance between the supply and delivery is 100 m. A ball check valve is used with 15-cm diameter galvanized iron pipeline. Determi..
Calculate the high risk use the one hit assumption : The recommended threshhold limit value ( TLV-ACGIH) air concentration for occupational exposure to water-insoluble hexavalent chromium Cr (VI) is 0.01 mg/M^3. this concentration is based on an assumption that the individual is generally healthy and i..
Evaluate its mass and average density : The mysterious Planet X has a radius of 5.50 x 106 mand an acceleration due to gravity of 13.0 m/s2 at its surface. Calculate its mass and average density
Determine the magnitude of the acceleration at the instant : A motorcyclist travels around a curved path that has a radius of 200 . While traveling around the curved path, the motorcyclist increases speed by 1.25 . a) If the motorcyclist starts from rest, determine the time needed to reach an acceleration of 5..
Determine the elastic and plastic section modulus of the : Determine the elastic and plastic section modulus of the I-beam. The axis runs through the center of the beam on both x and y axis (completely symmetrical). Beam properties: h= 12inches tf= 0.5 inches bf= 6 inches tw= 0.25 inches
What is the minimumuncertainy in the atoms velocity : The position of a hydrogen atom (m=1.7x10-27) isknown to within 2.0x10-6m. What is the minimumuncertainy in the atom's velocity

Reviews

Write a Review

Civil Engineering Questions & Answers

  What nominal effective rates of return per year will

A 12%, $50,000 bond is offered for sale at $45,000. If the bond interest is payable monthly and the bond matures in 20 years, what nominal effective rates of return per year will the purchaser make on the investment?

  Strength to operate the pulley

If the difference in weight between the two baskets must greater than 15 lb they will not have the strength to operate the pulley. The King weighs 195 lb, the princess weighs 105 lb, and the prince weighs 90 lb.

  Calculate the surface area required for a stabilization pond

Calculate the surface area required for a stabilization pond to serve a domestic population of 1000. Assume 80 gpcd at 210 mg/l of BOD. Use a design loading of 20 lb of BOD/acre/day.

  Define dispute in largest open-pit copper mine

Dispute in largest open-pit copper mine, My recollection may be skewed, so for our purposes, consider this example a hypothetical, but this is my recollection of a real case. In the early 80s, in Salt Lake County, Utah, a dispute arose involving t..

  What is the min possible value for the pressure difference

Part of a vertical piping system consists of 8 ft of 4 in diameter, connected to 8 ft of 3 in diameter above, and connected to 8 ft of 2 in diameter above that. Water at 60 F flows up the pipe (no downward flow occurs).

  What are the critical properties that allow for the function

Consider the components that are required for an automobile. List 5 components and identify the class of material that is used for each component. What are the critical properties that allow for the function of the material in that application

  What is the biomass concentration in the aeration tank

average flow rate = .0022 m^3 /s (190 m^3 /d) Influent Substrate concentration = 250 mg/L as COD (all essentially soluble) Mean cell residence time is to be 5 days Volume of mix tank = 25 m^3 the reactors kenetic constants are

  Design a curve for highway by stationing of the pc and pt

A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.

  Calculate the true stress for fracture in the neck region

A copper wire breaks under an engineering stress of 43x10^3 psi. Its ductility is 77%it reduction area. Calculate the true stress (in psi) for fracture in the neck region.

  Find the nominal flexural strength and the design strength

Consider a singly reinforced concrete beam with a base dimension of b= 12in and d=20in. Assume all bars are located in one row. Use Grade 60 steel and 5ksi concrete. Find the nominal flexural strength and the design strength for the following cases

  What is the level of the service of this compound-grade

If the peak-hour factor is .90 and all of the drivers are regular users, what is the level of the service of this compound-grade freeway segment?

  Find the uniform flow depth of concrete trapezoidal channel

Find the uniform flow depth (in feet) of a concrete trapezoidal channel with a bottom width of 30 ft. and side slopes of 2:1. The channel is laid at a slope of 0.05% and carries a design discharge of 1000 cfs.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd