Calculate the fuel load density and the opening factor

Assignment Help Civil Engineering
Reference no: EM13300078

A hotel room has a floor area of 10 m by 4 m and is 2.5 high and has a window which is 1.6 m high and 3 m wide. The room contains some furniture and other commodities containing 50 kg polyurethane with 25 MJ/kg and 350 kg wood with 18 MJ/kg. Calculate the fuel load density and the opening factor and give a temperature time curve for the design of the structural stability if the enclosing construction can be assumed to be of fire compartment type A. AND if the enclosing construction is of lightweight concrete?

Reference no: EM13300078

Questions Cloud

What is the emf induced in the inner solenoid : one solenoid is centered inside another. the outer one has a length of 45.0 cm and contains 6800 coils, what is the EMF induced in the inner solenoid
What happened to the price of your bond : Right away, market interest rates jumped, and the YTM on your bond rose to 6 percent. What happened to the price of your bond?
What does algorithm compute eciency : What does algorithm compute - what is its basic operation and how many times is the basic operation executed?
What should the investor pay : If the investor purchasing the rights to the royalties requires a return of 7 percent per year, what should the investor pay?
Calculate the fuel load density and the opening factor : A hotel room has a floor area of 10 m by 4 m and is 2.5 high and has a window which is 1.6 m high and 3 m wide. The room contains some furniture and other commodities containing 50 kg polyurethane with 25 MJ/kg and 350 kg wood with 18 MJ/kg.
Calculate how high is the image formed by the contacts : The far point of a nearsighted person is 8.5 m from her eyes, and she wears contacts that enable her to see distant objects clearly. How high is the image formed by the contacts
At what price did it sell shares to the market : Suppose that Hilton Web-Cams has made only one offering of common stock. At what price did it sell shares to the market?
How to calculate the grams of the compound that equals : To prepare 100 mL of a 0.500 M solution of this hydrated form requires 0.0500 moles of this salt. Calculate the grams of this compound that equals 0.0500 moles, showing all your calculations.
Estimate energy release rate by using regression equation : A concrete building has floor area 10 m by 20 m and is 4 m high. THe building has four windows with a height 1.6 m and a width 2 m. After 10 minutes gases in the room have an average temperature of 700 degree Celcius.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Duplex system with no redundancy

What is the salt usage for each regeneration if the system regenerated every 10 days? What size resin tanks (diameter, height) would be required for a duplex system with no redundancy?

  Horizontal motion of plunger and shaft

The horizontal motion of plunger and shaft is arrested by resistance of the attached disk which moves through the oil bath. If the velocity of plunger is v.

  Find what is the maximum you would pay for the bond

A 10-year $2000 Bond with a coupon rate of 10% paid semi-annually is available for purchase. What is the maximum you would pay for this bond if your MARR (without inflation) is 6%, and you estimate an inflation rate of 3% annually

  Determine the value of po

determine the value of Po, as a funciton of H, for these two investment alternatives to be equivalent at an interest rate of i=15% per year.

  Plot the magnitude of the force exerted on the gate

Plot the magnitude of the force exerted on the gate by the brace as a function of the angle of the gate, , for . Assume the weight of the gate is negligible.

  What diameter is required if the concrete pipe is to carry

A ciricular sewer is laid on a slope of 0.5%. What diameter is required if the concrete pipe is to carry 25 cfs If the desired design mean suction velocity is between 3 and 7 ft/s, is the design acceptable

  What is the water-balance estimate of the lake evaporation

Measurements of water-balance components have been made for a one-year period on a lake with an area of 4.4 km2 with the following results: P = 350 mm, Qsi = 2.33 x 107 m3, Qgi = 2.2 x 105 m3, Qgo = 0.6 x 105 m3, and Qso = .10 x 107 m3.

  Determine what is the rate of flow into the reservoir

Runoff from a storm flows into a reservoir with a surface area of 20.0 ha at a constant rate. The reservoir level is observed to rise at 1 mm per minute when water is being released through the dam at a rate of 10 m3 per second.

  Determine the required volume flowrate qm in the model

Model tests are to be performed to study the flow through a large check valve having an inlet diameter of 2 feet and a volume flowrate Qp of 30 cfs. The working fluid in the model is water at the same temperature as that in the prototype.

  Detremine the cfat in year 0 for the challenger and defender

The defender had a first cost of $300,000, but its market value now is only $100,000. It has chargeable expenses of $120,000 per year and no expected salvage value. To simplify calculations, assume that SL depreciation was charged at $60,000 per y..

  Calculate the equilibrium concentration of dissolved oxygen

Calculate the equilibrium concentration of dissolved oxygen in 15ºC water at 1atm and again at 2,000m elevation.

  Draw the shear and bending moment diagrams for the beam

The beam ABC of length L has two different moments of inertia (2I in AB, I in BC) and a constant elastic modulus E. It is fixed at point A has a roller support at point B and a load P at C. a. Sketch the deflected shape of this beam.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd