User Account

All Pages

Calculate the free work available to drive recrystallization

Assignment Help Mechanical Engineering
Reference no: EM132416660

Calculate the free work available to drive recrystallization of cold-worked aluminum with a dislocation density of 10^15 m^-2. For aluminum, G = 26GN/m^2, b = .286 nm, density = 2700 kg/m^3

Reference no: EM132416660

Questions Cloud

Neglect kinetic energy except at the diffuser inlet : Use an air-standard analysis and neglect kinetic energy except at the diffuser inlet and the nozzle exit.
Determine the rate of heat input to the combustor : The turbine isentropic efficiency is 89%, and the nozzle isentropic efficiency is 97%. The pressure at the nozzle exit is 18 kPa. Use an air-standard analysis.
Determine temperature rise : If 60% of the braking capacity is provided by the front disk brake rotors, determine their temperature rise.
What is the temperature of the two : After the casting cools and the oil bath warms, what is the temperature of the two? The weight per unit volume of the oil is 7.5 lb/gal.
Calculate the free work available to drive recrystallization : Calculate the free work available to drive recrystallization of cold-worked aluminum with a dislocation density of 10^15 m^-2.
Did the study address a clearly focused issue : Did the study address a clearly focused issue? Did the authors use an appropriate method to answer their question? Were the cases recruited in an acceptable way
Calculate the buckling loads for the 5 ft-long columns : Calculate the buckling loads for the 5 ft-long columns made of 6061-T6 aluminum alloy having a solid, square cross section with 2-inch sides
Calculate in units of btu the amount of heat : If the engine produces 100 hp of mechanical work, calculate in units of Btu the amount of heat that must be supplied to the engine each hour.
Estimate the average die temperature : Estimate the average die temperature after a long period of steady operation.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  For 20 mole of methane per second determine the amount of

consider the combustion of methane using 20 excess air with a methane conversion of 85. air enters at 300oc and methane

  A fluid particle flowing along stagnation streamline

A fluid particle flowing along stagnation streamline, as shown in Video V4.9 and Fig. P4.35, slows down as it approaches the stagnation point. Measurements of the dye flow in the video indicate that the location of a particle starting on the stagnati..

  Determine the speed at which it is kicked and the speed at

the ball at a is kicked such that thetaa 30 degrees. if it strikes the ground at b having coordinates x 15ft y -9ft

  Find the sum of the angles in the spherical triangle

Angles in a spherical triangle. Find the sum of the angles in the spherical triangle shown in Fig. 1.5, assuming A is at the pole and a = radius of sphere. In order to find the angle at A, consider what would be the value of a in order for the ang..

  The allowable shearing stress is 15ksi in a steel rod ab

the allowable shearing stress is 15ksi in a steel rod ab and 8ksi in a brass rod bc. knowing that a torque of magnitude

  Find the ideal area ratio for the diffuser

A small jet aircraft designed to cruise at Mach 1.5 has an intake diffuser with a fixed area ratio. Find the ideal area ratio for this diffuser.

  Find the discharge q through this layered sample

Calculate the discharge Q through this layered sample, if the head difference between the top and bottom of the sample is 20 cm.

  Determine the shear stress at the neutral axis

The beams of cross sections shown are subjected to a total shear force of 20 kN. Determine the shear stress at the neutral axis (X-X axis).

  Steam power plant that operates ideal reheat rankine cycle

Consider a steam power plant that operates on the ideal reheat rankine cycle. Steam enters the high-pressure turbine at 6 mpa and 400°c and leaves at 2 mpa. Steam is reheated to 400°c and expands in the low-pressure turbine to 20 kpa.

  Determine the two manometer readings h and h

Determine the two manometer readings, h and H. (ANS: 0; 0.252 ft)

  Volumetric flow rate of air into the cooler

In a device to produce potable water, humid air at 90°F, 29.7 in Hg, and 95% relative humidity is cooled to 40°F at constant pressure. What volumetric flow rate of air into the cooler (ft3/min) is required to provide 10.0 gal/mm of condensed water..

  Determine the steadystate amplitude of the block

For the system shown, m = 5.5 kg, k = 2300 N/m, and c = 37 N · s/m. The horizontal displacement imposed on the shaker table B is y(t) = 2.5 sin 18t mm, where the time t is measured in seconds. Determine the steadystate amplitude of the block.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd