Calculate the flow rate through the system

Assignment Help Physics
Reference no: EM13501381

A horizontal water main with a cross-sectional area of 196 cm2 necks down to a pipe of area 40.4 cm2. Meters mounted in the flow on each side of the transition coupling show a change in gauge pressure of 98.0 kPa. Determine the flow rate through the system, taking the fluid to be ideal.

Reference no: EM13501381

Questions Cloud

What is the maximum velocity of the mass : A mass m=10kg is oscillates between two springs k 1 =100N/m and k 2 =200N/m. what is the maximum velocity of the mass
Find the frequency of the beacon observed on the spaceship : A spaceship is approaching a space station at a speed of 2.0 105 m/s. find the frequency of the beacon observed on the spaceship
How many electrons should be removed : How many electrons should be removed from an initially uncharged spherical conductor of radius 0.29 m to produce a potential of 6.8 kV at the surface
Develop an auditor report attesting to management : Develop an auditor report attesting to management's assertions regarding the effectiveness of internal controls and recognize situations that present potential ethical and legal issues and develop solutions for those issues.
Calculate the flow rate through the system : A horizontal water main with a cross-sectional area of 196 cm2 necks down to a pipe of area 40.4 cm2. Determine the flow rate through the system, taking the fluid to be ideal
How high above the ground was the acorn before it fell : You attach a meter stick to an oak tree, such that the top of the meter stick is 2.47 meters above the ground. how high above the ground was the acorn before it fell
Briefly outline one audit procedure : You have just been appointed as the auditor of Gritty Manufacturing Ltd and you are in the process of planning your first audit. Gritty manufactures security cameras and is a part of the electronics industry.
Determine the induced emf in the bar and rails : A bar of length 2 cm slides along metal rails at a speed of 1 cm/s. The bar and rails are in a magnectic field of 2 T, pointing out of the page. what is the induced emf in the bar and rails
How fast would javelin have to be going : How fast would javelin (normally 2.5 m long) have to be going (relative to an observer) to appear 20% shorter? (2 m long)

Reviews

Write a Review

Physics Questions & Answers

  Find the bullets temperature change in degrees celsius

A 0.042 kg aluminum bullet traveling at 456 m/s strikes an armor plate and comes to a stop. what is the bullet's temperature change in degrees Celsius

  Calculate the electric field between the plates

Two parallel conductive plates of area 0.3m2 hold equal-but-opposite charges of magnitude 30?C on either side. calculate the electric field between the plates

  How much heat is required to change this water to steam

A 500.0 g pot of water at room temperature (20.0C) is placed on a stove. How much heat is required to change this water to steam at 100C

  Find the magnitude of the force of the car on the truck

A 1200 kg car pushes a 2200 kg truck that has a dead battery . When the driver stes on he accelerator, What is the magnitude of the force of the car on the truck

  What is the work done on the box

A rope is used to pull a block a horizontal distance of 50 metres. If the rope tension is 120 N, What is the work done on the box

  Determine with what speed will it hit the earths surface

A NASA satellite has just observed an asteroid that is on a collision course with the Earth. With what speed will it hit the Earth's surface

  Calculate the circuits time constant

An initially uncharged 4.53x10-6 F capacitor and a 7250 ohm resistor are connected in series, Calculate the circuit's time constant

  What is the velocity of each ball

What is the velocity of each ball. while both pipes vibrate at their fundamental frequencies, a beat frequency of 15 Hz is heard. How many centimeters were cut off the end of the second pipe? The speed of sound is 343 m/s.

  What is the work done on the truck by the machines force

A machine pulls a 40 trunk a distance of 2 m along a 40 degree incline at constant speed. what is the work done on the truck by the machines force

  Determine the frequency do you hear

A car is traveling away from you at 40.0 mi/h. The car horn produces a sound at a frequency of 480 Hz. What frequency do you hear

  What f-stop number should be used under light conditions

If f8 and 1/125 s gives the proper exposure, what f-stop number should be used with 1/500 s under the same light conditions

  Q1 in a head-on collision a car stops in 024 from a speed

q1. in a head-on collision a car stops in 0.24 from a speed of 25. the driver has a mass of 74 and is fortunately

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd