Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Application: Spot welding of sheet stock. In an electric spot welding machine, the electrodes are circular with diameter d = 10 mm. Two sheets of steel are welded together (Figure 7.47). H the power density (in steel) required for welding is 108 W/m3, calculate:
(a) The potential difference needed on the steel sheets and the current in the electrodes.
(b) The dissipated power density in the electrodes.
Discuss the consequent effects on the real and reactive power losses, and on the voltage drop across the series impedance of the transmission system.
A 10-hp, 250-V shunt motor has an armature circuit resistance of 0.5 Ω and a field resistance of 200 Ω. At no load, rated voltage, and 1200 r/min, the armature current is 3 A. At full load and rated voltage, the line current is 40 A, and the flux ..
The per-phase equivalent circuit shown in Figure 13.2.6 of a three-phase, 600-V, 60-Hz, four pole, wye-connected, wound-rotor induction motor has the following parameters: R1 = 0.75 Ω, R'2 = 0.80 Ω, Xl1 = X' l2 = 2.0 Ω, and Xm = 50 Ω. Neglect the ..
A preliminary (Class 4) estimate of the ISBL capital cost of building a 200,000 ton per year ethanol plant by corn dry milling has been stated as $130 MM -30%/+50%.
The limestone is supplied with average dimension 1.5 cm and must be reduced to 20 mesh before feeding to the gasification process. Recommend equipment to achieve the desired particle size and estimate the work required.
What are the advantages of this design compared to the simple Rankine plant? Additional data: The efficiency of both stages in the turbine and of the pump is 80%.
Neglecting stator resistance, leakage reactance, and all losses, if the stator-to-rotor turns ratio is 2:1 and the applied voltage is 100 V, find the rotor-induced emf at standstill and at 0.05 slip.
Describe the principles of a vapour adsorption refrigeration system, and compare this to a vapour recompression system. Which of the two systems is more suitable for refrigeration processes in a brewery or distillery and why?
Acetylene (C2H2) and butane (C4H10) are gaseous fuels with enthalpies of combustion of 49.9 kJ/g and 49.5 kJ/g, respectively. Compare the energy available from the combustion of a given volume of acetylene to the combustion energy from the same ..
1. find laplace transforms of the following functions where a b and c are constants.a. a bt ct2b. asin2tc.nbsp e-3t2.
Steam at 2000 kPa containing 6% moisture is heated at constant pressure to 848.15 K (575°C). How much heat is required per kilogram?
Rotor resistance referred to the stator. Repeat the problem, given that the original rotor is rewound with the same number of turns as originally, but with one-half the original cross section of the conductor. Neglect the changes in the leakage fl..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd