Calculate the depth downstream of the jump and the energy

Assignment Help Civil Engineering
Reference no: EM13557044

(a) A hydraulic jump occurs in an rectangular channel 2.3 m wide when the discharge is 2.5 m^3/s. If the upstream depth is 0.25 m calculate the depth downstream of the jump and the energy loss in the jump.

(b) A wide alluvial stream carries water with a mean depth of 1 m and slope of 0.0005. The mean diameter of the bed material is 0.5 m with a density of 2650 kg/m^3. Examine the stability of the bed.

Reference no: EM13557044

Questions Cloud

You are planning a polaris observation at latitude 42 degree : You are planning a Polaris observation at latitude 42 degrees North when the star is at or near upper culmination. You want to know the error in azimuth that will result from a 1 min timing error. You know that the meridian angle, t, is exactly 0 deg..
Determine the crates velocity when it slides back down the : The 90-lb force is required to drag the 200-lb crate 60 ft up the rough inclined plane at constant velocity. If the force is removed when the crate reaches point B, and the crate is then released from rest
Calculate the angle between the resultant force : Here are 3 forces acting on the ring. using the non vector approach, determine the resultant force of only the 150 Ib and 100 Ib forces. Also calculate the angle between the resultant force and the positive x axis.
Determine the angle and the magnitude of the force along the : For the following position r and the force F, determine the angle and the magnitude of the force along the position vector. Also determine the force vector along the positon vector.
Calculate the depth downstream of the jump and the energy : A wide alluvial stream carries water with a mean depth of 1 m and slope of 0.0005. The mean diameter of the bed material is 0.5 m with a density of 2650 kg/m^3. Examine the stability of the bed.
Determine the volume of water in gallons added to the tank : A water main is used to refill an elevated storage tank during the night. a 100 ft long, 12 in steel pipe (ks=.06 mm) connects to the booster pump that provides a pressure of 75 psig at the pump outlet.
Remain at the previously indicated rate of climb : If the static port of an aircraft became blocked during a climb the vertical speed indicator would: 1.Remain at the previously indicated rate of climb 2.Fall to zero rate of climb indication 3.Indicate a maximum rate of climb 4.Indicate a maximum rat..
Provide the expression for the velocity and acceleration : An airplane A takes off with a constant speed equal to vo=200 km/h. The path of the airplane is described by the equation y=kx^2, where k=6 x 10^-4 m^-1. Provide the expression for the velocity and acceleration of the airplane when x=390m. Express th..
Determine the value of the froude number for : An important dimensionless parameter in certain types of fluid flow problems is the Froude number defined as V/(gl)^1/2 where V is a velocity, g the acceleration of gravity, and l a length

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine rate of increase of speed and the normal force

sled and rider with a total weight of 200 lb travel down smooth slope defined by equation y=x^2/20. At x=40 ft the sled's speed is 10 ft/s. At x=40 ft determine rate of increase of speed and the normal force which the slope exers on the sled.

  Determine the surface at which motion will impend

Two identical uniform boards, each of weight 40lb, are temporarily leaned against each other. Knowing that the coefficient of static friction between all surfaces is 0.40

  Calculate the nominal and the effective rate of return

A 10-year, 12%, $1,000 bond that pays dividends quarterly can be purchased for $900. If the bond is purchased and pays as scheduled, calculate the nominal and the effective rate of return that the purchaser receives.

  Determine the maximum normal stress above the base

When filled to capacity, avertical cylindrical un-pressurized storage tank contains water to a height of 14.5m above its base. Given that the height of the tankis 15m, the diameter 9m and wall thickness 18mm

  What superelevation rate would you recommend

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Determne the diameter of the tube at a uniform rate

A 25 mm diameter steel cylinder falls under its own weight at a uniform rate of 0.1 m/s inside a tube of slightly larger diameter. Castor oil of viscosity 0.25 N.s/m2 fills the spacing between the tube and the cylinder.

  Calculate the viscous drag force on the plate

Calculate the viscous drag force on this plate, assuming boundary-layer flow with free-stream velocity of 15 ft/s and plate dimensions of L = 8 ft and W = 4 ft.

  Define the f by m ratio in context of biological treatment

Define the f/m ratio in the context of biological treatment of wastewater, and relate the f/m ratio to the exponetial growth and declinign growth phases of a bacterial culture.

  Determine what is the minimum do in the river

A stream is in equilibrium with atmospheric oxygen upstream of a waste outfall. The waste outfall creates a BODo of 20 mg/L in the stream. The k(BOD) is 0.4 /day and the k(o2) is 1.4 / day. The stream temperature is 15 degrees Celsius.

  How many cubic yards of aggregate must be ordered

how many cubic yards of aggregate must be ordered for a road base 16 inches thick and 2000 feet long with a top width of 30 ft, if the side slopes are one on one, or 45 degree

  Determine the maximum moment that can be carried

A rectangular reinforced concrete beam with dimensions b = 14in, d = 25in, and h = 28in is reinforced with three No. 10 bars. Material strengths are fy = 60,000 psi and fc prime = 5,0000 psi.

  What is the concentration of ocl-

HOCL is added to water in a tank as a disinfectant. after equilibrium is reached it is found that the pH of the water in the tank is 8.2 and the gas phase partial pressure is the head space of the tank is 0.2E-7 atm. (not: henry's law constant for..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd