Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
2000 kg/h of milk is sterilized in a steam infusion sterilizer. Themilk is heated to 1458C by introducing it into the steam infusion chamber H and then is cooled quickly by flashing in the flash vessel F. The vapor that flashes off in the vessel F is condensed in the condenser C by direct contact of the vapor with cooling water. To avoid dilution of the milk, the pressure in the vessel F must be such that the rate at which vapor flashes off in the vessel F is equal to the steam that is added in the vessel H. Calculate the cooling water flow rate in the condenser that will give the required pressure in the flash vessel. The following data are 28 4 Energy Balance given: The temperature of the milk at the inlet of H is 408C, the temperature of the cooling water at the inlet of the condenser is 208C, the steam introduced into the chamber H is saturated at 475.8 kPa pressure, and the heat capacity of the milk is 3.8 kJ/kg8C at the inlet of the infusion chamber and 4 kJ/kg8C at the exit of the infusion chamber.
the ridigid cube in the sketcha 1.0m tall box with a relief vavle at the top is filled w air at 280k and 100kpa. the
Air, initially at 220 kPa and 450 K undergoes a polytropic state change to 374 kPa and 495 K. What is the polytropic exponent of this process? Saturated water vapor is contained in a rigid container. Heat is then added until the pressure and temperat..
air flows at a constant velocity over a flat plate which is heated over the entire length at a fixed temperature. the
a heat pump with refrigerant 134a is used maintain a house at 25 degc by absorbing heat from a geothermal water source
steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooling to 400 k in an air environment
Another infinite straight wire, aligned with the y-axis is now added at a distance 2L = 68 cm from segment bc of the loop as shown. A current, I3, flows in this wire. The loop now experiences a net force of zero.
the cooling water flow rate to the condensers of a big coal-fired power plant is 8460 kgs. the water enters the
A hypersonic gun tunnel is used to generate short-duration, high-speed flows and typically consists of two cylindrical volumes separated by a diaphragm. One end of the tunnel (the driver end) is pumped to a high pressure, while the other end (the dri..
an electric current of 5a passing through a resistor has a measured voltage of 6v across the resistor. the resistor is
the 2 mg car is being towed by a winch. if the winch exerts a force of t125s on the cable where 13m is the displacement
At steady state, air at 200 kPa, 325 K, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross sectional areas. The inlet cross sectional area is 6 cm squared. At the duct exit, the pressure of the air is 100 kP..
Investigating A Dynamic Movement in Polar Coordinates
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd