Calculate the concentration of pm in the stack

Assignment Help Civil Engineering

Reference no: EM13559309

A stack (T=550*F and P=750mm Hg) was sampled using EPA Method 5. The total gas volume that flowed through the dry gas meter was 2.785 cubic meters (at T=60*F and P=800mm Hg). The mass of particles collected was 1.50g. Also, 72.0g of H2O was collected in the impingers.

A. Calculate the concentration of PM in the stack (micrometers/m^3) at stack conditions

B. The stack gas exits at an average velocity of 20m/s, and the stack has an inside diame of 5m. What is the emission rate of PM, in kg/day?

C. What is the PM concentration in micrograms/dscm?

Reference no: EM13559309

Questions Cloud

What would be the retention time in each tank : A water treatment plant has 6 settling tanks that operate in parallel (the flow gets split into six equal flow streams), and each tank has a volume of 600 m3. If the flow to the plant is 10 MGD, what is the retention time

Find the support movements draw sfd and bmd : A fixed beam of span 6m carries point loads 20kN and 15kN at 2 m and 4 m from the left end respectively. Find the support movements draw SFD and BMD

Evaluate what is the frequency heard by the observer : A train at rest emits a sound at a frequency of 1000 Hz. What is the frequency heard by the observer

Evaluate the work done by the aluminum : A 3.0 kg block of aluminum isheated from 20°C to 90°C at atmospheric pressure. Find the work done by the aluminum

Calculate the concentration of pm in the stack : A stack (T=550*F and P=750mm Hg) was sampled using EPA Method 5. The total gas volume that flowed through the dry gas meter was 2.785 cubic meters (at T=60*F and P=800mm Hg). The mass of particles collected was 1.50g. Also, 72.0g of H2O was collected..

Obtain what was the speed of the car before impact : An automobile having a mass of 1000 kg is driven into a brickwall in a safety test. What was the speed of the car before impact

Calculate the true volumetric flow rate of methane in the : A previously calibrated rotometer is being used to measure a gas flow. The old calibration curve is a straight line described by the following equation:

Calculate the average atomic mass of lithium : The isotope lithium-7 has a mass of 7.0160 atomic mass units, andthe isotope lithium-6 has a mass of 6.0151 atomic mass units. calculate the average atomic mass of lithium

Estimate the daily emissions of particles from a solid-waste : Estimate the daily emissions of particles from a solid-waste incinerator emitting at 0.18g/dscm. The incinerator burns 50 tonnes per day (1 tonne= 1 metric ton= 1000kg) and exhausts gases in a ratio of 20kg of gases per kg of feed

User Account

All Pages