Calculate the change of specific enthalpy across turbine

Assignment Help Mechanical Engineering

Reference no: EM13705952

A steam turbine receives a steam flow of 1.35 kg/s and the power output is 500 kW. The heat loss from casing is negligible. Calculate

1) The change of specific enthalpy across turbine when the velocities at entrance and exit and the difference in elevation are negligible.

2) The change of specific enthalpy across the turbine when the velocity at entrance is 60 m/s, the velocity at exit is 360m/s and the inlet pipe is 3m above the exhaust pipe.

Reference no: EM13705952

Questions Cloud

Assuming ideal gas behavior and using nitrogen table : Three kg of nitrogen is compressed from 110 kPa, 27 C to 1100 kPa in a polytropic process with n=1.3 in a closed system. Assuming ideal gas behavior and using nitrogen table,

Determine the specific volume at the indicated state : For each case, determine the specific volume at the indicated state. Locate the state on a sketch of the T-v diagram.

Determine the internal volumetric heat generation rate : For a one-dimensional wall (a slab) with a thickness of 60 mm and a thermal conductivity of 27 W/mK, the temperature distribution is given by T(x) = a + bx + cx^2 where a = 300 C, b = 160 C/m, and c = -2000 C/m^2. The x is in meters. Determine the in..

Carbon monoxide gas undergoes a constant-pressure process : In a cryogenic application, carbon monoxide (CO) gas undergoes a constant-pressure process at 1000 lbf/in^2. In a piston-cylinder assembly from T1=-100F to T2=-30F Determine the work for the process, in Btu per lb of carbon monoxide present.

Calculate the change of specific enthalpy across turbine : A steam turbine receives a steam flow of 1.35 kg/s and the power output is 500 kW. The heat loss from casing is negligible. Calculate The change of specific enthalpy across turbine when the velocities at entrance and exit and the difference in elevat..

Piston-cylinder assembly contains two-phase liquid-vapor : A piston-cylinder assembly contains a two-phase liquid-vapor mixture of H2O at 200 lbf/in^2. With a quality of 80%. The mixture is heated and expands at constant pressure until a final temperature of 480F is reached. Determine the work for the proces..

What wavelength photons are required to excite electrons : Atoms are 1-dimensionally aligned with an inter atomic distance of 10nm. Let’s assume that the positive charge of the nucleus of the atom is infinitely large so that electrons are confined to a specific atom. Then, what wavelength photons are require..

Difference in height of the column of mercury in manometer : One side of a mercury manometer is connected to the top of frictionless piston-cylinder storage tank containing 1500 liters of oil, the other side is open to the atmosphere. The difference in the height of the column of mercury in the manometer is 90..

What is the pressure in tank when it is filled with steam : A tank contains 10,000 kg of xenon at 132 C, 82 bar. The plant supervisor asks you to remove xenon and fill the tank with 10,000 kg of steam at 200 C. What is the pressure in the tank when it is filled with steam?

User Account

All Pages