Calculate the bending stress

Assignment Help Mechanical Engineering

Reference no: EM13703040

Consider a T shaped wooden beam comprised of a 2 x 6 and a 2 x 8 20 feet long. [Use nominal dimensions for beam cross section.] A steel plate 20 feet long and of cross section 6 x ½ inches is fastened to the top of the T.

Assume the beam is subjected to a bending moment of magnitude -540 ft lb at some point along its length. Calculate the bending stress? at that point (a) at the top of the steel, (b) at the bottom of the steel just above the wood, and (c) at the top of the wood just below the steel.

Reference no: EM13703040

Questions Cloud

What is the entropy change of the steam : Steam enters a nozzle at 4 MPa and 640Â°C with a velocity of 20 m/s. This process may be considered reversible and adiabatic. The nozzle exit pressure is 0.1 MPa. (a) Draw a sketch of this process. Include all known information. (b) What is the entro..

Consider a simply supported beam of length : Consider a simply supported beam of length 50 ft subjected to a uniformly distributed downward load of 10 kips/ft from x=10 ft to x=40 ft and concentrated downward loads of 100 kips at x=10 ft and x=40 ft. Determine the shear and moment diagrams from..

Maximum allowed pressure within the cylindrical vessel : Consider a pressure vessel made by welding together two hemispheres of radius 20 ft and wall thickness 1.5 inches. If the allowed normal stress is 90 ksi, calculate the maximum allowed pressure within the spherical vessel.

Simply supported beam of length-shear and moment diagrams : Consider a simply supported beam of length 50 ft subjected to a uniformly distributed downward load of 10 kips/ft from x=10 ft to x=40 ft and concentrated downward loads of 100 kips at x=10 ft and x=40 ft. Determine the shear and moment diagrams from..

Calculate the bending stress : Consider a T shaped wooden beam comprised of a 2 x 6 and a 2 x 8 20 feet long. [Use nominal dimensions for beam cross section.] A steel plate 20 feet long and of cross section 6 x ½ inches is fastened to the top of the T. Calculate the bending stress..

Determine forces in members DE-DF and EF of scissors truss : Determine the forces in members DE,DF, and EF of the scissors truss shown. Also, state whether the members are in tension or compression. Note that the 400 lb force is directed along the line BF and the 800 lb force is parallel to line BF.

Determine the mass flow rate of the superheated steam : Liquid water at 200 kPa and 20 C is heated in a chamber by mixing it with superheated steam at 200 kPa and 150 C. Liquid water enters the mixing chamber at a rate of 1.3 kg/s, and the chamber is estimated to lose heat to the surrounding air at 25 C a..

Find the power input to the compressor : A steam compressor receives H 2O at 90kPa and 75% quality at a rate of 50 kg/s. Part way through the compressor, steam is bled off at 20kg/s, 2MPa and 300C. The remainder exits the compressor at 10MPa, 500C. Assuming heat transfer and changes in po..

Determine the analysis in terms of mole fractions : The analysis of a mass basis of an ideal gas mixture at 50 F, 25 lbf/in2. is 60% CO2, 25% SO2, and 15% N2. The analysis in terms of mole fractions. Determine: The apparent molecular weight of the mixture. The partial pressure of each component in lbf..

User Account

All Pages