User Account

All Pages

Calculate the area of reinforcement required

Assignment Help Civil Engineering
Reference no: EM132416421

A simply supported rectangular beam of 7 m span carries characteristic dead (including self-weight of beam), gk, and imposed, qk, loads of 12 kNm-1 and 8 kNm-1 respectively. The beam dimensions are breadth, b, 275 mm and effective depth, d, 450 mm. Assuming the following material strengths, calculate the area of reinforcement required.

fcu = 30 Nmm-2

fy = 500 Nmm-2

Reference no: EM132416421

Questions Cloud

Difference between springwood and summerwood : Describe the difference between springwood (also called earlywood) and summerwood (also called latewood) in terms of density. Which one is stronger?
Estimate the vertical and transverse mixing coefficients : A sewage plant releases 250 m3/day of effluents containing 195 ppm of a chemical at the center of a wide, slowly meandering stream.
Suitable forcompression applications : Explain why the typical shape of a UC compared to a UB makes it more suitable forcompression applications. Use of diagrams and reference
Design the bending reinforcement : The reinforced concrete beam has an effective span of 9 m and carries uniformly distributed dead (including self weight of beam) and imposed loads
Calculate the area of reinforcement required : Assuming the following material strengths, calculate the area of reinforcement required.
Calculate the design loads on a typical internal beam : Assuming that the unit mass of the steel beams is 50 kg m-1 run, calculate the design loads on a typical internal beam.
Explain why lime is sometimes used in mortar : Explain why lime is sometimes used in mortar. Explain the purpose of wall ties in cavity wall construction.
TAX737 Tax Fraud and Investigation Assignment : TAX737 Tax Fraud and Investigation Assignment Help and Solution, Universiti Teknologi MARA - Assessment Writing Service - Discuss why do people do not want
Compute a satisfactory curve length : If the existing curve is inadequate, compute a satisfactory curve length.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What will be the approximate temperature of the alloy

Is it possible to have a copper-silver alloy of composition 50 wt% Ag-50 wt% Cu that at equilibrium, consists of α and β phases having mass fractions Wα = 0.60 and Wβ=0.40? If so what will be the approximate temperature of the alloy? If such an a..

  Calculate the height of water in the standpipe after 4 hours

A falling-head permeability test is being conducted on a saturated sample of clayey silt having hydraulic conductivity of 6.5 x 10-9 m/s. The diameter and the length of the sample are 100 mm and 150 mm

  Find an expression for the pressure gradient in x-direction

A frictionless, incompressible steady flow field is given by V=2xyi-y^2j in arbitrary units. Let the density be ρ_0=constant and neglect gravity. Find an expression for the pressure gradient in the xdirection.

  A 25-ft long crane supported at its lower end by a pin is

a 25-ft long crane supported at its lower end by a pin is elevated by a horizontal cable as shown in the figure. a

  Compare three-decimal-place values of two approximations

Compare the three-decimal-place values of the two approximations at x=(1/2) with the value y(1/2) of the actual solution . then do the same for PART B: y'=-2xy , y(0)=2 ; y(x)=2e^(-x^2)

  Describe the differences among the three key groups of rocks

Explain why sedimentary rocks are of particular importance to geotechnical engineers.

  Three cylinders from the same mix were tested

Three cylinders from the same mix were tested for strenght.  Cylinders A and B were cast in 4x8 molds while cylinder C was cast in a 6x12 mold.  The total loads were as follows; cylinder A= 65,200 lbs.,  cylinder B= 68,550 lbs., cylinder C= 151,190 l..

  Write out the steps for the aldol condensation reaction

Write out the steps for the aldol condensation reaction between the enolate anion of propanal with pentanal.

  Explain what design speed was used to design the curve

A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft

  Problems were found in the use of precast concrete

Problems were found in the use of precast concrete, is:A. Need a larger initial investmentB. Requires fabricating a very wide area

  Is the maximum load the ultimate load

Discuss some of the issues you would consider in the interpretation of the data.

  How many truckloads of trucks hauling an average volume of

How many truckloads of trucks hauling an average volumeof 6 LCY (4.6 LCM) would be required to haul 1 million CCY (764, 600 CCM) of gravel to a dam site?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd