Calculate the area of ceiling vents

Assignment Help Civil Engineering
Reference no: EM13897312

Fire Dynamics: Energy Release and Ceiling Ventilation
An atrium has a floor area of 30 m by 20 m and is 20 m high. The ceiling ventilation is designed for a fuel area of 30 m2 with an energy release rate of 0.5 MW/m2. The inlet openings are very large. An effective heat conduction coefficient can be assumed to be 20 W/m2°C.

(a) Calculate the area of ceiling vents required for ensuring a maximum thickness of the smoke layer of 5 m.

(b) A weak fire occurs in the atrium; a sofa burns for 3 minutes and releases energy at the constant rate of 500 kW. The ceiling vents are opened through signals from smoke detectors at the ceiling level, which activate at a temperature rise of 10°C. What will happen? Will the atrium be filled with smoke? How fast will this happen?

Reference no: EM13897312

Questions Cloud

Which of the following bacterial types can produce endospore : Which of the following bacterial types can produce endospores, enabling them to survive hundreds of years in a dormant state?A)    Vibrio   C) ClostridiumB)    Bacillis   D) A & B Only   E) B & C Only
Determine the total cost function : Determine the total cost function C (T). (Hint: It includes the cost of producing the product and fixed cost.) Find the marginal cost function Cm for producing the product
What are adverse selection and moral hazard? : What are adverse selection and moral hazard?
Calculate the area of ceiling vents : Calculate the area of ceiling vents required for ensuring a maximum thickness of the smoke layer of 5 m
Discuss limitations due to soil features : How do soil types (sand, silt, clay content) or soil restrictions, such as rockiness or hard pans influence choices related to power source, tillage, and planting equipment? Discuss limitations due to soil features and how a producer might overcom..
Be sure to save an electronic copy of your answer : Directions:  Be sure to save an electronic copy of your answer before submitting it to Ashworth College for grading. Unless otherwise stated, answer in complete sentences, and be sure to use correct English, spelling and grammar. Sources must be cite..
A researcher is testing the effect of sunlight : A researcher is testing the effect of sunlight on plant growth.  She takes 2 plants and places them in full sun, 2 are placed in a moderately sunny environment and 2 are placed in the dark.  Those placed in the dark are A. positive control
What is the definition of forest management : What effect does the harvesting of trees and deforestation have on forests and the environment? Is there a preferred method for harvesting trees?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the velocity and acceleration of point b

The velocity of the center point of the wheel is constant at 20 ft/sec to the right. For the instant, determine the following: a) The velocity and acceleration of point B (which is attached to the wheel) measured with respect to ground.

  Determine the minimum diameter shaft that can be used

The electric motor at A exerts a torque of 800N.m on the steel shaft from A to D. This has a torque of -300N.m at B and -500N.m at C. the dimensions are

  Show this operation on a linear schedule

A project consists of replacing the track on an existing railroad line, involving 3000 feet of track. The old track can be removed at a rate of 70 feet per hour. The old railroad ties can be removed at a rate of 200 feet (measured along the track) pe..

  The inclined leg differential manometer as shown in figure

the inclined leg differential manometer as shown in figure 1 below shows a reading along the inclined leg mercury

  Determine the magnitudes of the normal force acting on block

The coefficient of kinetic friction between block A and the inclined plane is mu_k = 0.11 . The angle of the inclined plane is given by theta = 45. Neglect the weight of the rope and pulley. Part A - Normal Force Acting on Block A Determine the ma..

  Determine the lengths of dg and cb of triangular tract

ABC is a triangular tract of land. The 1.5 tract DEFG is to be subdivided. AE is 480ft and DC is 350 ft. Determine the lengths of DG and CB. (Note 1 acre= 43,560 f^2)

  Determine the required cross sectional area of the cables

A steel plate which is 1.5 m by 1.5 m and 30 mm thick is lifted by four cables attached to its corners that meet at a point that is 2 m above the plate. Determine the required cross sectional area of the cables

  Define your coordinate system

A trapezoid has a bottom width of b, and top width of T, a heightof h, and side slopes of z(horizontal to vertical). By integration, determine the location of the centroid of thetrapezoid Define your coordinate system.

  What is the solids concentration of primary clarifier sludge

A 20 mgd wastewater treatment plants primary clarifier influent has 800 mg/l solids. the clarifier removes 18 percent of the solids. the sludge flow rate is 0.070 MGD.

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Find the magnitude and direction of the friction force

Determine whether the block shown is in equilibrium and find the magnitude and direction of the friction force when theta=30 and P=150N

  What is the pressure in pipe at point a consider friction

A reservoir discharge into a 60-inch concrete pipe (rough surface) that discharges freely. what is the pressure in the pipe at point A consider friction, but neglect minor losses.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd