Calculate the air temperature rise occurring

Assignment Help Mechanical Engineering
Reference no: EM13717635

A group of 20 students attend class in a room which measures 7m x 7m and has a 3 m ceiling height. Assume that each student occupies 0.07 m3 and gives out 400 kJ of heat per hour. Calculate the air temperature rise occurring within 15 min of the start of the class if the room is completely sealed and insulated. Take cv = 5/2 R.

Reference no: EM13717635

Questions Cloud

Water at a local bulk temperature : Water at a local bulk temperature of 10o C flows through a 3-cm-ID pipe at 1 m/s. The pipe walls are kept at 70o C and the flow is fully developed. Evaluate h and the local value of / b dT dx . The relative roughness of the pipe is 0.001.
Needs to be transferred into a geostationary circular orbit : A satellite is currently in a 300 km altitude circular orbit and needs to be transferred into a geostationary circular orbit. The mission designers require the transfer to have a semi-major axis of 35,000 km. compute the required delta- v values for ..
Determine the power input required to operate the compressor : The compressor of a refrigeration unit operates with a flow rate of 1800 kg/hr and an isentropic efficiency of 0.75. The working fluid is R-134 which enters as a saturated vapor at 20 C and exits the compressor at a pressure of 1 MPa. Determine the p..
Determine the exit temperature and pressure of the air : A. Steam enters well-insulated turbine at 7000 kPa, 600°C, with a velocity of 288 kph and leaves the turbine at 50 kPa and 150°C, at a velocity of 504 kph. The power output of the turbine is 6600 kW.  Air enters an adiabatic nozzle at 45 psia and 940..
Calculate the air temperature rise occurring : A group of 20 students attend class in a room which measures 7m x 7m and has a 3 m ceiling height. Assume that each student occupies 0.07 m3 and gives out 400 kJ of heat per hour. Calculate the air temperature rise occurring within 15 min of the star..
What is the work done and the entropy generated for process : What is the work done and the entropy generated for the process that is a rigid container with volume 200 L and is divided into two equal volumes by a partition with both sides containing nitrogen, one side is at 200 kPa, 100oC and the other side is ..
One of the processing departments at wielgus corporation : In September, one of the processing departments at Wielgus Corporation had beginning work in process inventory of $27,000 and ending work in process inventory of $10,000. During the month, $296,000 of costs were added to production.
Find the total input of heat in these processes : One half of a mole of air is taken through the following processes in a closed piston-cylinder arrangement. From the initial state (V1 = 10 L, p1 = 1 atm) the gas is expanded at constant pressure to a volume of 20 L. It is then heated at constant vol..
Discuss their philosophy of leadership and strategies : Interact with a senior manager, which from a CPA firm, to discuss their philosophy of leadership and specific strategies they have used to lead. After the interview, you will practice applying your knowledge of leadership to study the intervie..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  An electric motor draws a current of 10 amp with a voltage

an electric motor draws a current of 10 amp with a voltage of 110v. the output shaft develops a torque of 10.2 n-m and

  A rankine power cycle operates with an open feedwater

a rankine power cycle operates with an open feedwater heater. the boiler pressure is 6.0 mpa. a superheater provides a

  An insualed piston-cylinder device contains 5 kg of satured

an insualed piston-cylinder device contains 5 kg of satured mix of water initially at 100kpa and 6m3. now 3917kj of

  Neglecting potential energy effects and assuming ideal gas

air is heated at steady state as it flows through a constant area duct. at the inlet the pressure is 2.8 bar the

  Kinetic and potential energy effects are negligible

3 kg of refrigerant 22 undergoes a process for which the pressure-specific volume relation is pv^-0.8 = constant. The initial state of the refrigerant is 12 bar and 60 degrees C. The final pressure is 8 bar. Kinetic and potential energy effects are n..

  Does the radius of the column matter

Concrete has a density of 2500 kg/m3 and a compressive strength of 30 MPa. What is the maximum height of a column of concrete that can support its own weight? Does the radius of the column matter?

  What is the temperature of the propane leaving the valve in

propane vapor enters the valve at 1.5 mpa 70 c and leaves at 0.5 mpa. if the propane undergoes a throttling process

  The ultimate strengths in tension and compression are 210

a thin-walled cylindrical pressure vessel of 250 mm internal diameter and 5 mm thickness is subjected to an internal

  Heat is transferred to the nitrogen in the tank

A 1.2­m3 rigid tank contains nitrogen gas at 200 kPa and 350 K. Now heat is transferred to the nitrogen in the tank and the pressure of nitrogen rises to 900 kPa. The work done during this process is

  Water at a a flow rate of m 0215 kgs is cooled from 70

water at a a flow rate of m 0.215 kgs is cooled from 70 degrees celsius to 30 degrees celsius by passing it through a

  Find the rate of heat removed from the condenser

2 kg/s of steam enters a SSSF condenser at 10 kPa and 90% quality; and exits as saturated liquid at 10 kPa. Find the rate of heat removed from the condenser. Evaluate the entropy change in the boiler, and determine whether it is irreversible, reversi..

  If the weight of a loaded truck is described by a normal

if the weight of a loaded truck is described by a normal distribution with a mean of 13.2 tons and a standard deviation

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd