Calculate the absolute pressure head the gage pressure

Assignment Help Civil Engineering
Reference no: EM13562622

1.The pressure in the steam condenser of a nuclear power plant is 1 psia. Calculate the absolute pressure head, the gage pressure, the gage pressure head, the vacuum pressure, and the vacuum pressure head under standard conditions.

2.A barometer reads 29.41 inches of mercury neglecting surface tension and vapor pressure find the atmospheric pressure in lbf/in^2

3.If theta = 60 degrees and F=450N, determine the magnitude of the resultant force and its direction, measured counterclockwise from the positive axis. The other force is F=700N with a 15 degree angle to the x-axis .

Reference no: EM13562622

Questions Cloud

Determine the number of completely mixed chlorine contact : Determine the number of completely mixed chlorine contact chambers each having a detention time of 30 min that would be required in a series arrangement to reduce the bacterial count of a treated effluent form 10^6 to 14.5 organisms/mL if the first o..
Compute the horizontal distance : The slope distance between two points is 72.665 m, and the difference in elevation between the points is 1.120 m. Compute the horizontal distance.
Find the order of magnitude of its rate of energy loss : A large, hot pizza 84 cm indiameter and 2.0 cm thick, with a temperature of 92°C, What is the order of magnitude of its rate of energy loss
How much of a reduction in terminal time would be required : Determine how many buses needed to provide service on the following route with the indicated characteristics:
Calculate the absolute pressure head the gage pressure : The pressure in the steam condenser of a nuclear power plant is 1 psia. Calculate the absolute pressure head, the gage pressure, the gage pressure head, the vacuum pressure, and the vacuum pressure head under standard conditions.
Find the speed of the water in oneof the smaller channels : Water is flowing through a channel that is 12m wide with a speedof 0.75m/s. find the speed of the water in oneof the smaller channels
Evaluate how long does it take to reach the ground : Large meteorites are hardly slowed by Earth's atmosphere. how long does it take to reach the ground
Estimate by what vertical distance does it change : A barge is in a rectangular lock on a freshwater river. The lock is 60.0 m long and 20.0 m wide, and the steel doors oneach end are closed. by what vertical distance does it change
Determine the volume of sludge after filtration : In water and wastewater treatment process a filtration device may be used to remove water from the sludge formed by the precipitation reaction. The initial concentration of sludge from softening reaction is 2% (20,000 mg/L) and the volume of sludge i..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the ice point of water in the scale

Devise an absolute temperature scale where the boiling point of water at 1 atmosphere (101 kPa) pressure = 100 degrees in your scale. What is the ice point of water in your scale

  What should be the design q used in the full scale system

The flowrate (q) per unit lenght (ft^2/s) over the spillway shown below is a fuction of the upstream heah H, the acceleration due to gravity g, and the spillway height P.

  What is the reduction in oc for the exhaust temperature

Engineers at the General Electric turbine division are trying to improve an existing adiabatic steam turbine that receives 100 kg/s superheated steam at 10 MPa and 800 oC and after expansion and producing power,

  What percentage of the total load is carried by the shaft

What would be the load carrying capacity of a 250 mm-diameter and 15 m-long timber pile driven into soft clay with an unconfined compressive strength of 40 Kpa? What percentage of the total load is carried by the shaft?

  Why was the specific weight of water used to find the head

A beam must carry a total factored bending moment of 1062kN-m. It has a maximum beam effective depth of 25in. Design the beam in US customary units using f’c=4ksi and fy=413.4MPa. If necessary use d’=2.5in. Assume an exterior exposure according to AC..

  An open rectangular channel is 50 feet wide flowing at a

an open rectangular channel is 50 feet wide flowing at a depth of 5 feet and is carrying 1000 cubic feet per second.

  Will the two drops collide

A carpenter uses a hammer to strike a nail. Approximate the hammer's weight of 1.8lbs, as being concentrated at the head, and assume that at impact the head is traveling in the -j direction

  Concrete pier is loaded on top with a uniformly

Concrete pier is loaded on top with a uniformly distributed load of600 lbs per square foot.  Investigate the state of stressat a level of 4 ft. above the base.

  Construct a choice table for interest rates from 0 to100

QZY, Inc. is evaluating new widget machinesoffered by three companies. The machines have the following characteristics: A B C First cost $15,000 $25,000 $20,000 Maintenance and operating 1,600 400 900

  Determine the collimation error e present in the

a. explain how the presence of the collimation error e can be detected in a two peg test operation.b. a b and c are

  What is the distance corrected for the erroneous tapelength

A 100 ft steel tape known to be only 99.97ft long (understandard conditions) was used to record a measurem,ent of 215.63ft. What is the distance corrected for the erroneous tapelength

  Determine the stations and elevations of the bvc and evc

A 300 N force is applied at A as shown. Determine (a) the moment of the 300 N force about D, (b) the magnitude and sense of the horizontal force applied at C that creates the same moment about D, (c) the smallest force applied at C that creates the s..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd