Calculate surface temperature as a function of cooling-air

Assignment Help Computer Engineering

Reference no: EM131512425

Question: Let air at 540°C and 1 atm pressure flow at a velocity of 6 mls normal to a 2.5 cm diameter cylinder. Let the cylinder be of a thin-walled porous material so that air can be pumped inside the cylinder and out through the pores in order to cool the walls. Let the cooling air be at 40°C where it actually enters the porous material. The objective of the problem is to calculate the cylinder surface temperature in the region of the stagnation point for various cooling-air flow rates, expressed as the mass rate of cooling air per square meter of cylinder surface. The problem is to be worked first for no radiation and then assuming that the cylinder surface is a black body radiating to a large surrounding (say a large duct) at 540°C. The same cooling air could be used to cool the surface internally by convection without passing through the surface out into the main stream. Assuming that the cooling air is again available at 40°C and is ducted away from the surface at surface temperature, calculate the surface temperature as a function of cooling-air rate per square meter of cylinder surface area for this case and compare with the results above.

Reference no: EM131512425

Questions Cloud

The progression of alzheimers dementia : What might be some of the factors that lead such an environment to be beneficial toward slowing the progression of Alzheimer's dementia?

Plot the heat flux at all points along the plate length : Repeat Prob. but let the surface temperature vary sinusoidally from 40°C at the leading and trailing edges to BO°C at the centerline.

Compare and contrast the approaches of the four perspectives : Compare and contrast the approaches of each of the four perspectives (Piaget, Erikson, Skinner, and Vygotsky).

Find the local heat-transfer coefficient : Let air at a constant velocity of 7.6 mis, a temperature of 90°C, and 1 atm pressure flow along a smooth, flat surface.

Calculate surface temperature as a function of cooling-air : Let air at 540°C and 1 atm pressure flow at a velocity of 6 mls normal to a 2.5 cm diameter cylinder. Let the cylinder be of a thin-walled porous material.

The test-retest reliability of the diagnostic interview : There are several programs offered here to help with their depression; dance classes, kick boxing class, and counseling both individual and group.

Calculate the conduction thickness of thermal boundary layer : Consider liquid sodium at 200°C flowing normal to a 2.5 cm diameter tube at a velocity of 0.6 m/s. Using the results of Prob., calculate the "conduction".

Compute analysis of the laminar thermal boundary layer : Compute analysis of the laminar thermal boundary layer over a flat plate with a pressure gradient based on u8 =Cxm, t0 = const, and constant properties.

Analyze the current stage of the group : Analyze the current stage of the group and what you believe would be needed in order for the group to function more effectively.

User Account

All Pages