Calculate percipitable water in standard atmoshperic column

Assignment Help Civil Engineering
Reference no: EM13297233

Calculate the percipitable water (mm) in a 10-km high standard atmoshperic column if the surface conditions are temperature=20 degrees C, pressure=101.3 kPa and the laspe rate is 6.5 degrees C/km.

Reference no: EM13297233

Questions Cloud

What is the probability that a randomly chosen tv : A brand of television has a lifetime that is normally distributed with a mean of 7 years and a standard deviation of 2.5 years. What is the probability that a randomly chosen TV will last more than 8 years?
Obtain the frequency of the oscillator : A simple harmonic oscillator takes 17 seconds to undergo 17 complete oscillations. What is the frequency of the oscillator
Discuss the dangers of optimization in terms of min section : Discuss the dangers of optimization in terms of minimum section to support loads. In other words, how would optimizing for bending stresses affect the shear capacity of a section
Define one mole of an ideal gas is contained in a cylinder : One mole of an ideal gas is contained in a cylinder with a movable piston. The temperature is constant at 77°C. Weights are removed suddenly from the piston to give the following sequence of three pressures
Calculate percipitable water in standard atmoshperic column : Calculate the percipitable water (mm) in a 10-km high standard atmoshperic column if the surface conditions are temperature=20 degrees C, pressure=101.3 kPa and the laspe rate is 6.5 degrees C/km.
Compute the change in entropy that occurs : Calculate the change in entropy that occurs when 18.66 g of ice at -14.6°C is placed in 54.05 g of water at 100.0°C in a perfectly insulated vessel. Assume that the molar heat capacities for H2O(s) and H2O(l)
How the company actually performs : The Income statement coupled with the Statement of Cash Flows would give me a more complete picture of how the company actually performs. Provide a discussion.
Calculate vapor pressure-air pressure and relative humidity : Calculate the vapor pressure, air pressure, relative humidity, and air density at elevation 1500 m if air temperature is 25 degrees C and dew point temperature is 20 degrees C and the lapse rate is 9 degrees C/km
Determine the required reserves ratio : If the Friendly National Bank experiences a required reserves deficit, what actions can it take to be in compliance with the existing required reserves ratio?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Develop the relation between bulk unit weight

develop the relation between bulk unit weight, specific gravity, void ratio and weight of water.

  Determine the percentages of gravel-sand-silt and clay

The particle-size characteristics of a soil are given in this table. Draw the particle-size distribution curve. X-axis is Particle Size and Y-axis is Percent Finer Particle Size (mm): 0.425, 0.033, 0.018, 0.01, 0.0062, 0.0035, 0.0018, 0.001.

  What is the total volume of the vocs emitted each day

Assume that there were 1,100,000 vehicles making a 28.5-mi round trip per day, the average vehicle emission rate for VOCs is 1.3 g/VM , and the molecular weight of the VOC emissions from the mobile sources can still be represented by that of metha..

  Determine the deflection of a simple uniformly loaded

Determine the deflection of a simple uniformly loaded beam by the Ritz method,using first one term, then two terms, adn finally three terms in a sine series. Why does the coefficient of sin2piex/L vanish?

  Cantilever mass-less beam

Consider a cantilever mass-less beam subjected to a concentrated mass at the tip of the beam. Assume, length L, flexural stiffness EI, and mass m.

  Water behind the three gorges dam

Could all the people in china hold back the water behind the three gorges dam?

  Compute difference in the weights of dry gravel in a 10 ton

A stockpile of gravel that has a water content of 6% is rained on so that its water content increases to 9%. Compute the difference in the weights of dry gravel in a 10 ton truckload taken from the pile before and after the rain.

  How many 3-4 inch diameter rivets are required to transmit

How many 3:4-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi Assume each rivet carries the same amount of load.

  Describe how the surveyor would go about

State the full name of the section of SOLAS that sets out the minimum standards for the training and competence of crew members and describe how the surveyor would go about checking that a vessel had the necessary number of qualified staff.

  Purpose of the international space station

Briefly explain the purpose of the International Space Station, and list the name of all space agencies involved in building and operating it.

  Which truck will cause more pavement damage

a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(assume drainage coefficients are 1.0)

  Wall shear stress and friction velocity

A rectangular channel 5 m wide carries a discharge of 10 m^3/s at a uniform depth of 3 m. The channel is running on a slope of 0.0025 m/m. Estimate wall shear stress and friction velocity. Assume the density of flowing water as 1000 kg/m^3.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd