Calculate eight-hour time-weighted average noise exposure

Assignment Help Other Subject
Reference no: EM131723157

Assignment

1. Define the following terms associated with occupational noise:

a. Wavelength

b. Frequency

c. Sound Pressure

d. Decibel

e. Octave Band

2. You have been tasked with establishing and implementing an effective hearing conservation program for a metal stamping facility. Noise monitoring shows that employees working in the press areas of the facility are exposed to 8-hour TWA noise exposures between 85.0 dBA and 89.0 dBA. Based on the requirements of 29 CFR 1910.95, summarize the requirements for an effective hearing conservation program and discuss steps to make the program as effective as possible. Please refer to 29 CFR 1910.95(b)(2) for the formula.

3. Three workers (8-hour work shift) were monitored for work in different areas of a facility using calibrated noise dosimeters. The results are summarized in the table.

Time for Monitoring

Worker 1

Worker 2

Worker 3

3 hours

80.5 dBA

98.5 dBA

92.5 dBA

2 hours

81.0 dBA

86.5 dBA

85.0 dBA

2 hours

82.0 dBA

84.5 dBA

83.5 dBA

1 hour

95.0 dBA

83.5 dBA

80.0 dBA

a. Calculate the 8-hour time-weighted average (TWA) noise exposure for each of the three workers.

b. Summarize which (one) of the exposures exceeds OSHA's permissible exposure limit (PEL) and/or action level for noise.

c. Discuss what factors about the noise monitoring may have affected the accuracy of the noise measurements.

Show your work for all mathematical calculations. Please refer to Appendix A to 29 CFR 1910.95 for assistance on how-to solve this problem.

4. A plant that manufactures automobile chassis includes a production area containing 100 robotic welding stations. An adjacent area contains 10 welding booths where employees perform hand welding using MIG welders to rework welds that have been identified as unacceptable. Personal air sampling shows that personal exposures at 5 of the welding booths located in the middle of the rework exceed the OSHA PEL for lead, nickel, and iron oxide fumes. On average, the personal exposures exceed the applicable OSHA PEL by 2-3 times.

Using OSHA's Hierarchy of Controls, write one paragraph for the hazard scenario above that summarizes your approach to reducing the risks associated with the hazard. Indicate which type of hazard control you will use, and describe exactly how it will be used to control the hazard.

5.) A plant has an operation that produces automotive headliners in a press. The process uses a compound that contains methylene bisphenyl isocyanate (MDI). The compound containing MDI must be used in the production process to meet the client's specifications for the headliner. The OSHA PEL for MDI is 0.02 ppm as a ceiling concentration. Personal air samples collected for 15 minutes at the time when the press opens show that short-term exposures range from 0.02 ppm to 0.06 ppm.

Using OSHA's Hierarchy of Controls, write one paragraph for the hazard scenario above that summarizes your approach to reducing the risks associated with the hazard. Indicate which type of hazard control you will use, and describe exactly how it will be used to control the hazard.

6. A press area of a plant has six 400-ton presses in operation 24 hours a day, 7 days a week. Personal monitoring using noise dosimeters has shown that 8-hour time-weighted average (TWA) exposures range from 92.0 dBA to 94.5 dBA.

Using OSHA's Hierarchy of Controls, write a hazard scenario using the information above that summarizes your approach to reducing the risks associated with the hazard. Indicate which type of hazard control you will use, and describe exactly how it will be used to control the hazard.

7. Employees in the paint department of an automotive parts production facility use styrene to clean residue off the parts as they come off the paint line. The OSHA PEL for styrene is 100 ppm as an 8-hour TWA exposure. Personal air samples show that during peak production times, exposures range from 150 ppm to 200 ppm for an 8-hour shift. The parts cleaning is performed in a small room with one door.

Using OSHA's Hierarchy of Controls, write one paragraph for the hazard scenario above that summarizes your approach to reducing the risks associated with the hazard. Indicate which type of hazard control you will use, and describe exactly how it will be used to control the hazard.

Reference no: EM131723157

Questions Cloud

What are the major contributing factors : If yes, then why is there malnutrition or famine? Other than political instability and war. What are the major contributing factors?
Information impacted access to healthcare information : How has the law protecting health information impacted access to healthcare information?
Impact of training and development on employee performance : What the questions that should be added in questionnaire to analyse the impact of training and development on employee performance?
Define which of the given loan covenants are affirmative : Identify which of the following loan covenants are affirmative and which are negative covenants: Nige Trading Corporation must pay no dividends.
Calculate eight-hour time-weighted average noise exposure : Calculate the 8-hour time-weighted average (TWA) noise exposure for each of the three workers. Describe exactly how it will be used to control the hazard.
Analysis of the nursing workflow for medication : You have been asked to conduct an analysis of the nursing workflow for medication administration at your workplace.
How to control and manage credit risk : Suppose you were hired as a consultant by a lending institution's loan department to look at the quality of its controls designed to minimize credit risk.
Physician-patient privilege : Why do you suppose a physician-patient privilege did not exist at common law but had to be created by statute?
Define organization can apply risk management principles : Describe how the organization can apply risk management principles in its efforts to secure their systems.

Reviews

Write a Review

Other Subject Questions & Answers

  Cross-cultural opportunities and conflicts in canada

Short Paper on Cross-cultural Opportunities and Conflicts in Canada.

  Sociology theory questions

Sociology are very fundamental in nature. Role strain and role constraint speak about the duties and responsibilities of the roles of people in society or in a group. A short theory about Darwin and Moths is also answered.

  A book review on unfaithful angels

This review will help the reader understand the social work profession through different concepts giving the glimpse of why the social work profession might have drifted away from its original purpose of serving the poor.

  Disorder paper: schizophrenia

Schizophrenia does not really have just one single cause. It is a possibility that this disorder could be inherited but not all doctors are sure.

  Individual assignment: two models handout and rubric

Individual Assignment : Two Models Handout and Rubric,    This paper will allow you to understand and evaluate two vastly different organizational models and to effectively communicate their differences.

  Developing strategic intent for toyota

The following report includes the description about the organization, its strategies, industry analysis in which it operates and its position in the industry.

  Gasoline powered passenger vehicles

In this study, we examine how gasoline price volatility and income of the consumers impacts consumer's demand for gasoline.

  An aspect of poverty in canada

Economics thesis undergrad 4th year paper to write. it should be about 22 pages in length, literature review, economic analysis and then data or cost benefit analysis.

  Ngn customer satisfaction qos indicator for 3g services

The paper aims to highlight the global trends in countries and regions where 3G has already been introduced and propose an implementation plan to the telecom operators of developing countries.

  Prepare a power point presentation

Prepare the power point presentation for the case: Santa Fe Independent School District

  Information literacy is important in this environment

Information literacy is critically important in this contemporary environment

  Associative property of multiplication

Write a definition for associative property of multiplication.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd