Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A flocculation basin equipped with revolving paddles is 60 ft long (the direction of flow). 45 ft wide, and 14 ft deep and treats 10 mgd. The power input to provide paddle-blade velocities of 1.0 and 1.4 fps for the inner and outer blades, respectively, is 930 ft'lb/s. Calculate the detention time, horizontal flow-through velocity, and G (the mean velocity gradient) for a water temperature of 50'F.
A pump is necessary to lift water from the clear well (reservoir) at a water treatment plant to a storage tower 50-ft high and some distance away. A flow rate of 15 cubic per second (cfs) is required (68F).
Just below the point where a continuous discharge of pollution mixes with the river, the BOD is 10.9 mg/L and the DO is 7.6 mg/L. The river and waste mixture has a temperature of 20oC, a deoxygentation constant of 0.2/day
What type of exercise takes place in a classroom setting arranged to look like an emergency operations center or in an actual emergency operations center, and involves simulation using written, telephone, and radio messaging.
Saturated liquid water at 1.0 MPa is throttled adiabatically to a pressure of 0.4 MPa. If the change is kinetic energy is negligible, what percentage of the water evaporates during this throttling process?
The center to center spacing to the two tanks is 14 m. The new tank imparts 150 kPa at the ground surface. Find the increase in vertical stresses due to the weight of the two tanks mid- way between the two tanks at the center of the clay layer.
A small chunk of the original sample had a wet weight of 140.9 grams and weighed 85.2 grams after drying. Compute the water content, using the correct number of significant figures.
The steel uniform shaft has four pulleys attached to it and frictionless bearings at its ends. The pulley at B is connected to a motor that is driving the system. The other three pulleys are consuming the power delivered by Pb .
If 0.100 mol each of SO2 and NO2 are placed in a 500 mL vessel at this temperature, what are the concentrations of the reactants and products when equilibrium is established for this reaction?
The tank is insulated on the outside and the partition between the two sections is also an insulator. The partition can withstand a pressure differential across it of 400 kPa, before rupturing.
A contaminant in water is traveling through a saturated clay layer under a hydraulic gradient of 0.15. The clay has a hydraulic conductivity of 2 x 10^(-7) cm/s, a moisture content of 19%, and a Gs of 2.65.
Footings for a structure are to be built beneath a basement slab on a clay soil at a depth of 20 ft below present ground level. The groundwater table is 15ft below the ground surface. The soil void-ratio is about 0.087.
The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd