Calculate degree of saturation

Assignment Help Civil Engineering
Reference no: EM13559006

The moist unit weight of a soil is 119.5 pcf. For a moisture content of 12% and Gs=2.65, calculate the following;

a) void ratio

b) porosity

c) degree of saturation

d) dry unit weight

Reference no: EM13559006

Questions Cloud

Estimate the time of submersion in years : A piece of corroded steel plate was found in a submerged ocean vessel. it was estimated that the original area of the plate was 62.5cm 2 and approximately 2.8k had corroded away during the submersion. Assuming a corrosion penetration rate of 5.1mm/yr..
What is josess speen as he emerges from the sandy section : Jose, whose mass is 45.0kg, is riding his 5.0-kg skateboard downthe sidewalk with a constant speed of 6.0 m/s, What is Joses's speen as he emerges from the sandy section
To what rate of corrosion in mm/yr dose this correspond : A thick steel sheet of area 440cm3 is exposed to air near the ocean. After a one-year period it was found to experience a weight loss of 880g due to corrosion. To what rate of corrosion in mm/yr dose this correspond.
Find what is the power loss due to resistance in the line : A high-voltage transmission line with a resistance of 0.32 /km carries acurrent of 980 A. What is the power loss due to resistance in the line
Calculate degree of saturation : The moist unit weight of a soil is 119.5 pcf. For a moisture content of 12% and Gs=2.65, calculate the following;
What is the velocity ofthe lighter ball before impact : Two balls, of masses m(a) = 40 g and m(b) = 60 g, aresuspended. The lighter ball is pulled away to a 60 degreeangle with the vertical and released. what is the velocity ofthe lighter ball before impact
Compute the flexural strerangth if the load is fracture : A three point bending test is performed on a glss specimen having a rectangular cross section of hight d =6 mm and width b = 12 mm the distance between support points is 45mm.
How long could a person stand at this distance : A particular radioactive source produces 150 mrad of 2 MeVgamma rays per hour at a distance of 1.0 m. How long could a person stand at this distance before accumulating an intolerable dose of 1 rem
Comment on the accuracy of the natural frequencies and the : Consider the rocket on a test stand . The nose of the rocket is fixed. The rocket is of length L, constant EA and constant m, mass per unit length. To investigate longitudinal dynamics, the rocket is modeled using axial elements of equal length.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the stations and elevations of the bvc and evc

A +2 percent grade on an arterial highway intersects with a -1 percent grade at station (535 + 24.24) at an elevation of 300 ft. if the design speed of the highway is 65 mi/h,

  What is the average density of the actual solids contained

a 50cm^3 sample of dry soil from an aquifer weighs 100g. when it is poured into a graduated cylinder, it displaces 35cm^3 of water. What is the porosity of the soil. What is the average density of the actual solids contained in the soil

  Derive the 3-h snyder unit hydrograph for a 100-square km

Derive the 3-h Snyder unit hydrograph for a 100-km^2 watershed where the main stream is 15 km long and the distance from the watershed outlet to the point on the stream nearest to the centroid of the watershed is 7 km.

  Helium gas is compressed is entropically from 1 bar and 25 c

Helium gas is compressed isentropically from 1 bar and 25 C to a pressure of 10 bar. The temperature of Helium after the compression is A) 25 C B) 63 C C) 250 C D) 384 C E) 476 C

  Estimate length of pipeline required for the friction losses

Water leaves a reservoir at 0.05 m^3/s through a 200-mm riveted steel pipeline that protrudes into the reservoir and then immediately turns a 90º bend with a local (minor) loss coefficient equal to 0.3.

  Define a proposal

In my english class i have to write a propasl, and i choose to write a proposal on the libray doors at my school. the doors are very difficult to open even for young people like my self. who should i contact

  Determine the moment of inertia of the shaded area

Determine the moment of inertia of the shaded area about the following axis: a. x-axis b. y-axis show properly dimension figures.

  If you make decision by maximizing the expected

A manufacturing firm is considering two mutually exclusive projects. Both projects have an economic service life of one year, with no salvage value. The first cost of Project 1 is $1000 and the first cost of project 2 is $800. The Net year for each p..

  Estimate the formaldehyde concentration in the lake

A factory discharges its waste into a river upstream from a lake. The discharge release rate is 2 kg formaldehyde per day. The decay is a first order process with a decay rate of 0.000005/s. The waste is discharge into the river 30 km upstream from t..

  What is the elevation of n held vertically at point m

A transit was set at point M and a leveling rod was held vertically at point N. The horizontal cross line of the telescope was inclined so the reading of the horizontal cross line on the rod was 12 ft.

  Estimate ground-level particulate concentration 40m downwind

A long line of burning agricultural waste emits 0.3 g/m/s of particulate matter on a clear fall afternoon with winds blowing 3 m/s perpendicular to the line. Estimate the ground-level particulate concentration 400 m downwind from the line.

  How to select the lightest steel wide flange section

The span length is 32 feet. Total deflection is not to exceed span/240. Select the lightest (economical) steel wide flange section (W shape) with a yield stress of 50 ksi. Assume the beam weight to be 200 PLF

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd