Calculate air velocity and mass flow rate through the slit

Reference no: EM13300265

the room described in problem 8.1 gas a 1 m wude door with a 1 cm high slit at the floor level. THe oil spill has a rectagular area of sides 0.5 m by 0.5 m.

(a) calculate the pressure increase, the air velocity, and the mass flow rate throug the slit.

(b) the slit is now made 10 times higher. How will this influence the varaibles calculated in part A

Reference no: EM13300265

Questions Cloud

Calculate the time till the smoke layer is from the floor : A room has a floor area of 500 m^2 and a height of 4 m. THe room is involved in a fire with a constant energy release rate of 1 MW. calculate the time till the smoke layer is 1.5 m from the floor for (a) the case where the leakage areas are at the ..

Determine the net present value of the laser : Determine the net present value of the laser if the intial investment increases to $250,000?

The firstround of the des decryption : Compute the bits number 1, 16, 33, and 48 at the output of the firstround of the DES decryption, assuming that the ciphertext block iscomposed of all ones and the external key is composed of all ones

Steam enters converging–diverging nozzle operating at steady : Steam enters a converging–diverging nozzle operating at steady state with P1 = 40 bar, T1 = 400oC, and a velocity of 10 m/s. The steam flows through the nozzle with negligible heat transfer and no significant change in potential energy. At the exit, ..

Calculate air velocity and mass flow rate through the slit : the room described in problem 8.1 gas a 1 m wude door with a 1 cm high slit at the floor level. THe oil spill has a rectagular area of sides 0.5 m by 0.5 m. (a) calculate the pressure increase, the air velocity, and the mass flow rate throug the sl..

What was the firm eat in 2009 : Slattery Corp had year-end retained earnings balances of $670,000 in 2008 and $600,000 in 2009. In 2009 the firm paid $6,000 in preferred dividends and $10,000 in common dividends. What was the Firm's EAT IN 2009?

Organized to focus more on organizational : As you probably have noted, this course is organized to focus more on organizational and enterprise level issues than on individual or group behavior. There are other courses in the program that allow you the opportunity to reflect on lower le..

Calculate the power required to drive the compressor : Air compressor is used to compress 0.03 kg/s atmospheric air from 1 bar and 25oC to 10 bar. If the compression process is polytropic and follows the relation PV1.3=constant, calculate the power required to drive the compressor and the heat loss. Cons..

Find appropriately sized beam such that radius is not less : The yield stress for A-36 is 250 MPa. Using factor of safety against yield of 1.25, determine an appropriately sized beam such that the radius of curvature is not less than 140m. E= 200 GPa, G= 77.2 GPa.

User Account

All Pages