User Account

All Pages

Calculate a value for its atomic mass

Assignment Help Mechanical Engineering
Reference no: EM13706631

The lattice constant for BCC tantalum at 20oC is 0.33026 nm and its density is 16.6 g/cm3. Calculate a value for its atomic mass.

Reference no: EM13706631

Questions Cloud

Temperature of the atmosphere varies with height : Using the hydrostatic law dp/dz = -(rho)g and the ideal gas law p = (rho)RT, show that if the temperature of the atmosphere varies with height as T(z) = T_o - Bz, then the atmospheric pressure varies with height as p(z) = p_o(1-(Bz/T_o))^(g/(BR))
Maximum deformation in the rod must not exceed : A solid 0.625-in. diameter steel [E = 29300 ksi] rod (1) supports beam AB, as shown. If the stress in the rod must not exceed 20 ksi and the maximum deformation in the rod must not exceed 0.26 in., determine the maximum load P that may be supported.
Saturated liquid vapor mixture of water : 0.65m^3 rigid vessel initially contains saturated liquid vapor mixture of water at 150C. The water is now heated until it reaches the critical state. Determine the mass of the liquid water and the volume occupied the liquid at the initial state.
Determine the phase or phases in a system consisting : Determine the phase or phases in a system consisting of h20 at the following conditions and sketch p-v and t-v diagrams showing the location of each state (a)p=100 lbf/in^2, T=327.86F (b)p= 100lbf/in^2, T240F. (c)T=212F, p=10lbf/in^2 (d)T=70F, p=20lb..
Calculate a value for its atomic mass : The lattice constant for BCC tantalum at 20oC is 0.33026 nm and its density is 16.6 g/cm3. Calculate a value for its atomic mass.
Air is made up of nitrogen-oxygen-carbon dioxide and argon : Air is made up of Nitrogen, Oxygen, Carbon dioxide, Argon, water vapor, and some other stuff in really small amounts. List the compressibility factors for Air, Nitrogen, Oxygen, Carbon dioxide, Argon, and water at 300K and 100kPa.
What is the pressure remaining in the tank : A tank of compressed air is at 40°C and 10 atm. 1 third of the gas is removed for inflating a car tire. The tank is allowed to exchange heat with the surroundings to maintain its temperature at all times. What kind of a process is this? What is the p..
Find the first law efficiency of the cycle : A steam plant operates on a Rankine cycle. The following conditions are given: The steam exits the boiler at 550C and 15MPa. The heat supplied to the boiler is at 1000C. The condenser pressure is 8kPa. The flow exits the condenser with 4C of subcooli..
What is the efficiency of this fan ya motor system : A fan with a diameter of 12 inches operates at a voltage of 120V with a current draw of 0.5 amps. The manufacturer claims the average velocity of air leaving the fan is 33.1 ft./s under stadard conditions. Standard air has a density of 0.075 lb mass ..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The heat transfer rate through the walls and roof of a

the heat transfer rate through the walls and roof of a building is 3570 kjh per degree temperature difference between

  If the design load on the prototype is 500 n what will be

the drag on a 2-m. diameter satellite dish in an 80 kmhr wind is to be determined by a wind tunnel test using a

  Explain from an atomic structure point of view why metals

1. in selecting the materials for keyboards terminals and other computer equipment that house the electronic components

  What is the percent span for the old and new set points

In order to increase production rate a reactor set point was increased from 160 psig to190 psig. The reactor pressure transmitter was recalibrated from 0-200 psig to 0-300 psig.

  Shearing stresses on the directions normal and tangential

a steel plate of 12-in outer diameter is fabricated from 14in thick plate by welding along a helix that forms an angle

  A piece of electronic equipment that is surrounded by

a piece of electronic equipment that is surrounded by packing material is dropped so that it hits the ground with a

  At the exit the pressure is 01 bar the quality is 09 90 and

a steam turbine operates at steady state with a steam mass flow rate of 4600 kgh producing a power output of 1000 kw.

  953 1kg of a fluid is compressed according to a law pn 025

9.5.3 1kg of a fluid is compressed according to a law pn 0.25 where p is in bar and n is in m3kg. the final volume is

  The plank cde has a mass m15kg and is rest on a small pivot

the plank cde has a mass m15kg and is rest on a small pivot at d. a block a of mass 55 kg is resting on point c. a

  In an air-standard otto cycle the air at the beginning of

in an air-standard otto cycle the air at the beginning of the compression stroke is at 95 kpa and 22 degrees c and the

  Calculate the mass fraction of helium and the mass density

a he-xe mixture containing .75 mole fraction of helium is used for cooling of electronics in an avionics application.

  After the pressures but not the temperature in the two

an isolated chamber with rigid walls is divided into two equal compartments one containing steam at 10 bar and 370oc

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd