Calculate a power required for mixing and b if the system

Assignment Help Mechanical Engineering
Reference no: EM13632945

It is desired to prepare an emulsion in a baffled (4 in number) tank using standard flat-blade disc turbine. The tank is 0.61 m in diameter and height of liquid is that of tank diameter. The turbine rotates at 275 rpm. The density and viscosity of resultant liquid may be taken as 909 kg m-3 and 20 cP respectively. Calculate (a) power required for mixing and (b) if the system is scaled-up for mixing volume of syrup 100 times to that of the small tank as above keeping the mass transfer rate equal for each.

Reference no: EM13632945

Questions Cloud

Your microwave oven draws 1100 of electrical power when it : suppose that you have left a 200- cup of coffee sitting until it has cooled to 30 which you find totally unacceptable.
Carbon dioxide at 20 degrees c and a pressure of 575 kpa : 1 water flows through a 45 ft pipe with a 0.5 in diameter at a flow rate of 5 gpm. what facrtion of this pipe can be
A 282 g sample of nickel metal is heated to 998 degrees : a 28.2 g sample of nickel metal is heated to 99.8 degrees celsiusand place in a coffee-cup calorimeter containing 150.0
A glass tube of radius 080cm contains liquid mercury to a : a glass tube of radius 0.80cm contains liquid mercury to a depth of 64.0cm at 12 deg. find the depth of the mercury
Calculate a power required for mixing and b if the system : it is desired to prepare an emulsion in a baffled 4 in number tank using standard flat-blade disc turbine. the tank is
If you dissolve caffeine in acid a proton goes onto one of : if you dissolve caffeine in acid a proton goes onto one of thenitrogens to give the conjugate acid of caffeinecaffeineh
An automobile tire is rated to last for 30000 miles : an automobile tire is rated to last for 30000 miles. estimate the number of revolutions the tire will make in its
A copper sheet of thickness 2l2mm has an initial : a copper sheet of thickness 2l2mm has an initial temperature of ti118c. it is suddenly quenched in liquid water
Find the final temperature the specific heat of copper is : a 32 g block of ice is cooled to -75 degreescelsius. it is added to 511 g of water in a 71 g copper calorimeter at a

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A large plate contains a central crack of length 2 mm and

a large plate contains a central crack of length 2 mm and is subjected to a cyclic stress normal to the crack which

  The yield stress of a tension specimen machined from a 05 m

the yield stress of a tension specimen machined from a 0.5 m wide by 0.6 cm thick copper sheet is 145 mpa. the sheet is

  A structural member is subjected to combined loading so

a structural member is subjected to combined loading so that the fallowing stress occur at a critical point 100 50 40

  A keg of beer loumlwenbraumlu sg 111 has a small pinhole

a keg of beer loumlwenbraumlu sg 1.11 has a small pinhole leak in it. the beer sprays vertically into the air to a

  A four cylinder spark ignition engine has a compression

a four cylinder spark ignition engine has a compression ratio of 10.5 and each cylinder has a maximum volume of 0.4 l.

  A gondola on a ski lift is supported by two bent arms as

a gondola on a ski lift is supported by two bent arms as shown in fig. 3. each arm is offset by the distance b180 mm

  Natural gas is a mixture of methane ethane propane and

natural gas is a mixture of methane ethane propane and butane...as well as other components. consider natural gas

  A rigid tank contains 5 kg of refrigerant-134a initially at

a rigid tank contains 5 kg of refrigerant-134a initially at 20degc and 140 kpa. the refrigerant is now cooled while

  What is the diameter of the larger piston

a hydraulic system has a mechanical advantage of 4. If a smaller piston has a diameter of 5 inches what is the diameter of the larger piston?

  Calculate the heat-transfer rate and exit temperatures for

an air preheater for a power plant consists of a cross-flow heat exchanger with hot exhaust gases used to heat incoming

  Compare annual profit when the plant is operating at 90 of

a planet operation has fixed costs of 2000000 per year and its output capacity is 100000 electrical appliances per

  Review journal paper about types of trucks gap and skirts

Need a critical review journal paper about the different types of trucks gap and skirts and boat tails

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd