User Account

All Pages

Brief performance specification for a robotic hand

Assignment Help Mechanical Engineering
Reference no: EM131064919

Performance specifications of robotic hand that can write?.

write a brief performance specification for a robotic hand that will perform all the tasks that a human does when writing.

Your answer should consider degrees of freedom, speed and range of mnotion, force and power, and sensing?.

Verified Expert

Reference no: EM131064919

Questions Cloud

Computes the operation on two numbers : Calculator comes with "CLR" button pressing upon clears all the inputs and outputs.
What will be the cost of the new common stock : If there is $30 million in retained earnings, at what dollar value will the marginal cost of capital go up? If flotation cost on common stock is $1.50, what will be the cost of the new common stock?
What is the purpose of multiplexing : What is the purpose of multiplexing
Should this project be accepted based on profitability index : Nelson's Lamps is considering the acquisition of some new store fixtures. These fixtures will cost $189,000 and generate the following cash flows over its 5-year life: $65,700, $69,800, $57,600, $54,200 and $11,500. Should this project be accepted ba..
Brief performance specification for a robotic hand : Performance specifications of robotic hand that can write? - ??write a brief performance specification for a robotic hand that will perform all the tasks that a human does when writing.
Markets required to yield to maturity on risk bond : A bond of Telink Corporation pays $100 in annual interest with a $1000 par value. The bonds mature in 15 years. The market's required yield to maturity on a comparable-risk bond is 9 percent. Calculate the value of the bond. What is the value of the ..
Prepare a professional sales presentation : Choose a product or service in an industry that interests you. Your assignment is to prepare a professional sales presentation that demonstrates your mastery of the concepts learned in this class.
What was the average nominal risk premium on stock : You’ve observed the following returns on Crash-n-Burn Computer’s stock over the past five years: 3 percent, -10 percent, 26 percent, 13 percent, and 17 percent. What was the average real return on Crash-n-Burn’s stock? What was the average nominal ri..
Determine the value of the actuating force : For maximum braking, determine: The value of the actuating force, F. The value of the brake torque, T

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  With a safety factor of 4 what axial compressive load can

a 1x2-in bar is 20 in. long and made of steel with sy 25ksi. with a safety factor of 4 what axial compressive load can

  Separate stream of air with mass flow rate

Steam enters a counter flow heat exchanger operating at stead state at 0.07 MPa with a specific enthalpy of 2431.6 kJ/kg and exits at the same pressure as saturated liquid. The steam mass flow rate is 1.5 kh/min. A separate stream of air with mass fl..

  Determined the amount of heat transferred to the air in kj

air is contained in a cylinder device fitted with a piston-cylinder. the piston initially rest on a set of stops and a

  Assume that you are responsible for the design of a

assume that you are responsible for the design of a wide-plate tension member built from a structural aluminum. the

  Amplitude of the excitation provided to the machine

A 45 kg machine is mounted on a spring of stiffness 8x10^5 N/m. When the machine is set to vibration by a 32 Hz excitation, the machine's amplitude is measured as 1.5mm. What is the amplitude of the excitation provided to the machine? Ignore damping ..

  The wire temperature is 345 k the air temperature and

a hot wire anemometer is a device that is used to measure the velocity of flowing fluids. such a device is employed to

  Steam at 10 mpa 600 degrees c enters the first-stage

steam at 10 mpa 600 degrees c enters the first-stage turbine of an ideal rankine cycle with reheat. the steam leaving

  The system also experiences a decrease in internal energy

a 10-kg closed system undergoes a heating process 100 kj. work is done by the system on the surroundings 100 kj. the

  Determine the minimum value to create the specified moment

a 960 N.m moment is required to straghten a post. if the capacity of a winch puller is 2400N, determine the minimum value to create the specified moment.

  Determine the constants in the hall-petch equation and the

the strength of titanium alloy is found to be 450 mpa when the grain size is 17 x 10-6 m and 565 mpa when the grain

  Outlet temperature and the chip power dissipation

Using properties of cp = 1007 J/kg · K, k = 0.0263 W/m · K, and µ, = 185 X 10-7 N · s/m2, determine the air outlet temperature and the chip power dissipation.

  Pressure difference from one end of the pipe to the other

A piping system consists of 300 ft of 2-in pipe, a sudden expansion to 3-in pipe and then 75 ft of 3-in pipe. Water is flowing at 125 gal/min through the system. What is the pressure difference from one end of the pipe to the other?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd