Brick and can to have accurately similar height

Assignment Help Physics
Reference no: EM13659299

A brick is initially 7.72 cm high and an aluminum can is initially 7.73 cm high. By how much should their temperatures be raised in order for the brick and the can to have accurately the similar height?                                   

Reference no: EM13659299

Questions Cloud

Journey take according to mission control on earth : An astronaut travels to a star system 4.5 ly away at a speed of 0.9c. Suppose that the time needed to accelerate and decelerate is negligible. The journey take according to Mission Control on earth takes 5 years. And the journey takes2.2 years accord..
Behind vertical upstream face of a dam of width : In the figure, water stands at depth D = 35.0 m behind the vertical upstream face of a dam of width W = 315 m. Discover the torque due to the net horizontal force on the dam, measured regarding a rotation axis parallel to the dam and during point O.
What will be the height h of the air in the cylinder : A cylindrical chamber, open at the bottom, is to be submerged in the ocean and utilized as a diving chamber as shown in the figure below. Firstly air at a pressure of 1.00 atm and a temperature of305 K fills the cylinder of height4.95 m.
Suppose that the metal doorway does not expand considerably : A solid wood door 0.60 m wide is hung in a metal door way at 0.0°C by a clearance of 2.3 mm on the side. If the linear coefficient of expansion of the wood is 6.0*10 -5 (C°)-1, at what temperature would the door begin to touch the side of the doorway..
Brick and can to have accurately similar height : A brick is initially 7.72 cm high and an aluminum can is initially 7.73 cm high. By how much should their temperatures be raised in order for the brick and the can to have accurately the similar height?
What are focal lengths of objective and eyepiece : A refracting telescope has an angular magnification of -90.00. The length of the barrel is 1.800 m. What are the focal lengths of (a) the objective and (b) the eyepiece?
Discover the angle that the rod makes with the horizontal : A uniform 1.2-kg rod that is0.73 m long is suspended at rest from the ceiling by two springs, one at each end of the rod. Both springs hang straight down from the ceiling. The springs have identical lengths when they are unscratched. Their spring con..
What will be new pressure relative to the initial pressure : A quantity of steam (550 g) at 123°C is condensed, and the resulting water is frozen into ice at 0°C.How much heat was removed? What is the force in newtons acting on a 3.4 kg package of nails that falls off a roof and is on its way to the ground? A ..
Force exerted on the lower end of the boom by the hinge : A wrecking ball (weight = 4800 N) is supported by a boom, which might be assumed to be uniform and has a weight of 3200 N. As the drawing shows, a support cable runs from the top of the boom to the tractor. The angle among the support cable and the h..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd