Beam of electron is accelerated through potential difference

Assignment Help Physics
Reference no: EM13544673

A beam of electrons is accelerated through a potential difference of 10 kV before entering a region having uniform electric and magnetic fields that are perpendicular to each other and perpendicular to the direction in which the electron is moving. If the magnetic field in this region has a value of 0.010 T, what magnitude of the electric field is required if the particles are to be undeflected as they pass through the region?

Reference no: EM13544673

Questions Cloud

According to the definition of work : According to the definition of work, the work done by an external force in moving a heavy crate along a horizontal surface should be the same whether the force is pulling upward at a 45 degree angle or pushing downward at a 45 degree angle. In practi..
Solid uniform spherical boulder rolls down the hill : A solid uniform spherical boulder rolls down the hill as shown in the figure(Figure 1) , starting from rest when it is H = 43.0{\rm m} above the bottom. The upper half of the hill is free of ice, so the boulder rolls without slipping. But the lower h..
Two blocks are connected by a light cord : Two blocks are connected by a light cord. One block, of mass 4kg, sits on a horizontal table with static and kinetic coefficients of friction of 0.6 and 0.4, respectively, whereas the other block, of 2 kg mass, hangs over a frictionless light pull..
Calculate magnitude-direction of magnetic field in region : In Figure 20.12, a small particle of charge q = -7.0 x 10^-6 C and mass (m = 3.1x10^-12) has velocity (Vo = 9.4x10^3 m/s) as it enters a region of uniform magnetic field. The particle is observed to travel in the semicircular path shown, with radius ..
Beam of electron is accelerated through potential difference : A beam of electrons is accelerated through a potential difference of 10 kV before entering a region having uniform electric and magnetic fields that are perpendicular to each other and perpendicular to the direction in which the electron is moving. I..
Two blocks are attached by a light string : Two blocks are attached by a light string with one resting on a rough table and the other hanging over the edge via a frictionless pulley. If the blocks are initially at rest, the tension force is equal to the hanging weight.
Magnitude of the electric field inside this metal filament : The tungsten filament in the 36 ohm bulb is 8 mm long and has a cross-sectional area of 2e-10 m^2. What is the magnitude of the electric field inside this metal filament?
What is the maximum stretch during the motion : A horizontal spring-mass system has low friction, spring stiffness 200 N/m, and mass 0.4 kg. The system is released with an initial compression of the spring of 11 cm and an initial speed of the mass of 3 m/s.
What is the magnitude of the larger of the two resistances : When a 32.0-V emf device is placed across two resistors in series, a current of 11.0 A is flowing in each of the resistors. When the same emf device is placed across the same two resistors in parallel, the current through the emf device is 56.0 A. Wh..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd