Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A motorist traveling at 55 mph on an expressway intends to exit from the expressway using an exit ramp with a maximum allowable speed of 30 mph. At what point on the expressway should the motorist step on her brakes in order to reduce her speed to the max allowable ramp speed? Assume the coefficient of friction between the pavement and tires is .3 and the alignment of this section of the road is horizontal.
For this particular problem we can ignore the friction value and just use a standard deceleration rate of 11.2 ft/sec.
The system is initially divided in two parts, with 1/3 of the mass at T1 and 2/3 of the mass at T2. The divider is removed and the system eventually attains equilibrium.
Assuming a gage reading in the approach well(haa) of 13 ft, select a Parshall flume capable ofmeasuring a flow of 700 ft/s without submerging the flow.
Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.
its desired to produce 5 cubic yards of cencrete with a ratio of 1:1.8:3.5 of cement, snd, and gravel what are the required amounts of components if 5.5 gallons of water per sack of cement is to be used
A series of small packages, each with a mass of 0.5 kg, are discharged from a conveyor belt. Knowing that the coefficient of static friction between each package and the conveyor belt is 0.4, determine (a) the force exerted by the belt on the package
To avoid the salinization of soil in a farming area, parallel drainage canals are to be installed to maintain the water table at a depth of at least 4m below the ground surface. It is thought that no evapo-transpiration would occur below that depth.
If the specific surface energy for aluminum oxide is 0.90 J/m^2, using data contained, compute the criteical stress required for the propagation of an internal crack of length 0.40 mm.
How many centimeters of armor plating will a 150 gram 30 mm round penetrate. How far will a depleted uranium 30 mm round penetrate if its mass is 600 grams.
A motorist is traveling on a curved section of highway of radius 2500ft at the speed of 60 mi/hr. the motorist suddenly applies the brakes, causing the automobile to slow down at a constant rate. knowing that after 8 sec the speed has been reduced to..
In a three phase balanced system, a delta connected source supplies power to a wye connected load. If the line impedance is 0.2 + j0.4 ohms, the load impedance 3 + j2 ohms, and the source phase voltage
Show that the drinking water standard of 10 mg/L nitrate as nitrogen is equivalent to 45 mg/L nitrate. How is nitrate related to TN and TKN?
two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa. what length L of splice plate is needed if the axial load carried by the joint is 55 kN and the width (W) is 315 m..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd