At what horizontal distance left of the loop

Reference no: EM13714243

Problem: A 320 g model rocket is on a cart that is rolling to the right at a speed of 3.0 m/s. The rocket engine, when it is fired, exerts an 7.0 N thrust on the rocket. Your goal is to have the rocket pass through a small horizontal hoop that is 20 m above the launch point.

Part A: At what horizontal distance left of the loop should you launch?

I want help to find at what horizontal distance left of the loop should you launch.

Reference no: EM13714243

Questions Cloud

How many hours is it until the asteroid impacts the earth : A 1.6 x 1010 kg asteroid is heading directly toward the center of the earth at a steady 15 km/s. how many hours is it until the asteroid impacts the earth

What is the electric field strength between the disks : Two 12-cm-diameter charged disks face each other, 20cm apart. Both disks are charged to - 70nC. What is the electric field strength between the disks

Refrigeration cycle maintains a clean room : A refrigeration cycle maintains a clean room at 68o F by removing energy entering the room by heat transfer at the rate of 0.21 Btu/s. The cycle rejects energy by heat transfer to the outdoors where the temperature is 80o F. Assume steady state opera..

How far does the puck land from the base of the table : A rocket-powered hockey puck has a thrust of 1.5 N and a total mass of 1.0 kg. How far does the puck land from the base of the table

At what horizontal distance left of the loop : A 320 g model rocket is on a cart that is rolling to the right at a speed of 3.0 m/s. At what horizontal distance left of the loop should you launch

Thermal efficiency of reversible power cycle operating : The thermal efficiency of reversible power cycle operating between hot and cold reservoirs is 38%. Evaluate the COP of: (a) a reversible refrigeration cycle operating between the same two reservoirs. (b) a reversible heat pump cycle operating between..

Determine the thermal efficiency and energy discharged : A power cycle receives 1120 Btu by heat transfer from a reservoir at 1080o F and discharges energy by heat transfer to a reservoir at 280 o F. The thermal efficiency of the cycle is 68% of that for a reversible power cycle operating between the same ..

Estimate what is the speed of the block : A 2.70kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0300m. The spring has force constant 835N/m. What is the speed of the block when it has moved a distance of 0.0160m from its initial position

The microstructure of a copper-silver alloy : The microstructure of a copper-silver alloy at 775°C (1425°F) consists of primary and eutectic structures. If the mass fractions of these two micro constituents are 0.75 and 0.25, respectively, determine the composition of the alloy (expressed in wt...

User Account

All Pages