At what angle in degrees should the strip be placed

Reference no: EM13336890

A diagnostic tube has a target with a length of 10 mm. The electrons are focused along a strip of the anode 2.5 mm wide.

a) At what angle (in degrees) should this strip be placed to yield an apparent focal spot size 2.5 mm x 1.5 mm.

b) Using this size target, what angle is required to obtain a 2.5 mm x 2.5 mm apparent focal spot?

Reference no: EM13336890

Questions Cloud

What is the lateral magnification : An object is placed 8cm in front of a converging lens with a focal length of 18cm. What is the lateral magnification

Explain what is the pressure at 15 degree c : 1) a sample measures 711mmHg pressure at 15 degree C. Later the temperature goes to 45 degree C. What is the new pressure 2) a gas is at 45.2 atm and 51 degree C. what is the pressure at 15 degree C

Comment on the production control situations : Comment on the production control situations depicted by the four control charts shown on the following page, and state what action, if any, would be necessary in each case.

Determine the diameter of your coil : You have a 1.3m long copper wire. You want to make an N-turn current loop that generates a 1.0mT magnetic field at the center when the current is 1.2A. What will be the diameter of your coil

At what angle in degrees should the strip be placed : a) At what angle (in degrees) should this strip be placed to yield an apparent focal spot size 2.5 mm x 1.5 mm. b) Using this size target, what angle is required to obtain a 2.5 mm x 2.5 mm apparent focal spot

How far are you from the pole : If you hold a 900cm2 square plane mirror 43cm from your eyes and can just see the full length of an 7.7m flagpole behind you, how far are you from the pole

Design and sketch an average control chart : Design and sketch an average control chart, showing upper and lower design limits, upper and lower action limits, and nominal value. Calculate and state the range control limit value.

Show that angular magnification m is also given by equation : Isaac Newton, having convinced himself (erroneously as it turned out) that chromatic aberration was an inherent property of refracting telescopes, invented the reflecting telescope.

State the process mean between the points x and y : Write a brief note stating the circumstances under which cusum charting may be preferable to normal Shewart charting methods and calculate the mean of the sample values below, and suggest a suitable value for k, the cusum reference value.

User Account

All Pages