Assuming that the specific heat for the cold fluid

Assignment Help Mechanical Engineering

Reference no: EM13719100

A shell and tube heat exchanger with one shell pass and four tube passes is being analyzed to determine the heat transfer rate and the fluid outlet temperatures for prescribed flow rates and inlet temperatures. The cold fluid has a heat capacity rate of 4,200 W/K while the hotter fluid has a heat capacity rate of 2,100 W/K. The inlet temperatures are 50°C for the cold fluid and 150°C for the hot fluid. The number of transfer units is 3.5.

Assuming that the specific heat for the cold fluid is 4.2 kJ/(kg*K) and that the specific heat for the hotter fluid is 1.0 kJ/(kg*K), determine the mass flow rates for the hot and cold fluids.

Determine the actual heat transfer rate.

Reference no: EM13719100

Questions Cloud

Find the charge density on each surface of the dielectric : Two parallel plates have equal and opposite charges. When the space between the plates is evacuated, the electric field is E= 3.20×105V/m. find the charge density on each surface of the dielectric

Determine the exit temperature of the air : Air enters the evaporator section of an air-conditioner at 100 kPa, 27 C with a volumetric flow rate of 6 m^3 /min. R-134a enters the evaporator at 120 kPa with a quality of 0.3 and rate of 2 kg/min and it leaves as a saturated vapor at the same pres..

Calculate the magnitude of the charge on each conductor : A cylindrical air capacitor with a length of 13.2m stores an amount of energy equal to 3.20×109J when the potential difference between the two conductors is 4.80V. Calculate the magnitude of the charge on each conductor

Compressor efficiency and the entropy generation : An adiabatic compressor is used to bring saturated water vapor at a pressure of 103 lbf/in^2 up to 1000 lbf/in^2, where the actual exit temperature is 1000 F. Find the compressor efficiency and the entropy generation. Is there an improvement by reduc..

Assuming that the specific heat for the cold fluid : A shell and tube heat exchanger with one shell pass and four tube passes is being analyzed to determine the heat transfer rate and the fluid outlet temperatures for prescribed flow rates and inlet temperatures. The cold fluid has a heat capacity rate..

What does the scale read during the upward acceleration : An elevator undergoes constant upward acceleration, taking it from rest to 12.8m/s in 4.0 s. A 60kg man stands on a scale in the elevator. What does the scale read during the upward acceleration

What is the capacitance : The two plates of a capacitor hold +2130 µC and -2130 µC of charge, respectively, when the potential difference is 580 V. What is the capacitance

Elastic modulus and thermal conductivity perpendicular : Calculate the elastic modulus and thermal conductivity perpendicular to continuous, reinforcing fibers in an E-glass (70 vol%) polyester composite.

Evaluate what the electron final kinetic energy : A photon undergoes Compton scattering off a stationary free electron. The photon scatters at 30° from its initial direction; its initial wavelength is 2.0 × 10-12 m. What is the electron's final kinetic energy

User Account

All Pages