Assuming no friction losses in the bend

Assignment Help Mechanical Engineering

Reference no: EM13719897

A pipe transports water in a 4-cm-diameter pipe with an average velocity of 10 m/s. The pipe undergoes a 90 degree bend and exits out a 2-cm-diameter nozzle. Assuming no friction losses in the bend, the total force of teh water on the bend is nearest:

A) 1070 N

B) 1180 N

C) 729 N

D) 502 N

Reference no: EM13719897

Questions Cloud

Hydrogen to be ideal gas with constant specific heats : Hydrogen gas at 35ºC and unknown pressure (State 1) enters a steady, insulated system which has no work interaction with the surroundings. Half of the gas exits at 2 bars and 90ºC (State 2) and the other half exits at 2 bar and -20ºC (State 3).

What is the rate of entropy generation within the turbine : Air at 5 bar and 177°C (State 1) is expanded through a turbine to 1 bar and 27°C (State 2). The mass flow rate of air through the turbine is 2 kg/s. Stray heat loss of 53.22 kW occurs to a surrounding at 27°C. Calculate the power (kW) developed by th..

Rigid tank is divided into two equal parts by a partition : A rigid tank is divided into two equal parts by a partition. One part of the tank contains 3.1 kg of compressed liquid at 400 kPa and 60 degrees Celcius while the other part is evacuated. The partition is now removed, and the water expands to fill th..

Multiplied by to give teh drag of the full-scale submarine : Consider a submarine cruising at 0.18 m/s far below the surface in sea water at 20 degree C. A 1:50-scale model of the submarine is to be tested in a towing tank. The tests are performed in fresh water at 20 degree C. At what speed should the model b..

Assuming no friction losses in the bend : A pipe transports water in a 4-cm-diameter pipe with an average velocity of 10 m/s. The pipe undergoes a 90 degree bend and exits out a 2-cm-diameter nozzle. Assuming no friction losses in the bend, the total force of teh water on the bend is nearest..

Piston-cylinder arrangement has a load on the piston : A piston/cylinder arrangement has a load on the piston so it maintains constant pressure. It intially contains 1kg of steam at 500kPa and 50% quality. Heat from a reservoir at 700 C brings the temperature of the steam to 600 C.

What changes about the waves patterns : On the water simulation, what does the crest (peak) of the wave look like in the top view? What does the trough look like, When you add two drips, what changes about the waves' patterns

Using the average-end area-method : Determine the quantity of asphalt and granular material required for the parking lot. The asphalt is 4 inches thick and granular material is 8 inches thick.

What is the pressure that the pump can deliver : 4 kW motor is driving an oil pump with an efficiency of 95% in a 10 mm diameter pipe. If the velocities of the fluid in the pipe is 1.8 m/s. What is the flow rate that the pump delivers?

User Account

All Pages