Assuming complete combustion and constant specific heats

Assignment Help Mechanical Engineering

Reference no: EM13701078

Calculate adiabatic flame temperature butane (C4H10) burning in air at 298 k and 1 atm, assuming complete combustion and constant specific heats

Reference no: EM13701078

Questions Cloud

What is the specific heat capacity of this material : When a total amount of 125,000 joules of heat is transferred to a piece of 5 kg alloy, its temperature changes from 25 C to 60C, what is the specific heat capacity of this material?

A piston-cylinder setup filled with air : A piston-cylinder setup filled with air, initially at 27 °C, 1 bar, changes to 17 °C, and 0.9 bar. Determine, as a present, the change in volume of the air from its initial volume. (in %)

Calculate the energy transfer for each of the components : An air standard dual cycle operates with a compression ratio of 15. At the beginning of the compression the conditions are 17°C, 0.95 bar, and 3.8L. The amount of heat added is 6.3 kJ, of which one-third is added at constant volume and the remainder ..

What might account for differences between equilibrium : In the textbook Sodium and Chlorine are listed as having ionic radii of 0.98 and 1.81 Å respectively. NaCl can form a face-centered cubic unit cell. What is the lattice constant of such a unit cell? What might account for the differences between the ..

Assuming complete combustion and constant specific heats : Calculate adiabatic flame temperature butane (C4H10) burning in air at 298 k and 1 atm, assuming complete combustion and constant specific heats

What is the local heat transfer coefficient : Air at a pressure of 1 ATM, a temperature of 15° C, and a velocity of 10 m/s flows over a 3 m long flat plate that is heated to a uniform temperature of 140° C. What is the local heat transfer coefficient 3m from the leading edge of the plate?

Calculate the average temperature of the plate surface : Air at atmospheric pressure and a temperature of 25°C is in parallel flow at a velocity of 5 m/s over a 1m long flat plate that is heated with a uniform heat flux of 1250 W/m2. Assume the flow is fully turbulent over the length of the plate.

Fluid is ethylene glycol under the same flow conditions : For a laminar boundary layer flow over a flat plate with air at 20°C and 1atm, the thermal boundary layer thickness Dt is approximately 13% larger than the velocity boundary layer thickness D. Determine the ratio D/Dt if the fluid is ethylene glycol ..

Piston cylinder device contains : A piston cylinder device contains .733 kg of refrigerant-134a at -10 degrees C. The piston that is free to move has a mass of 8.63 kg and a diameter of 21.2 cm. The local atmospheric pessure is 88 kPa. Now, heat is transferred to the refridgerant-134..

User Account

All Pages