Assume an ideal brayton cycle

Assignment Help Mechanical Engineering
Reference no: EM13719878

A gas turbine (can assume an ideal Brayton cycle) has a pressure ratio of 10. It is connected to an electric generator with an efficiency of 95% which produces 200MW of electricity. The gas turbine burns natural gas with a heating value of 100,000 btu/therm. The waste heat from the gas turbine is used to generate steam in an ideal Rankine cycle. The efficiency of the Rankine cycle is 30%. The turbine of the Rankine cycle is attached to an electric generator with an efficiency of 95%. What electric output would you estimate for this electric generator? This system is called a combined cycle where you combine a gas turbine with a Rankine cycle (called the bottoming cycle in this case) to achieve an overall higher efficiency.

Reference no: EM13719878

Questions Cloud

Calculate the net entropy change of the system : A hollow steel sphere with a 0.5 m inside diameter and a 2 mm thick wall contains water at 2MPa, 250°C. The system (steel plus water) cools to the ambient temperature, 30°C. Calculate the net entropy change of the system and the surroundings for this..
Determine the final mass in the cooker : A pressure cooker has a volume of 0.011 m3 and initially contains a two-phase liquid-vapor mixture of H2O at a temperature of 100o C and a quality of 10%. As the water is heated at a constant volume, the pressure rises to 2 bar and the quality become..
Rectangular unfinished concrete channel with a width : A rectangular unfinished concrete channel with a width of 18 ft conveys water at 350 ft3/s. The temperature of the water is at 30oC. The channel has a slope of 0.001. Determine the liquid depth for uniform flow. Is the flow supercritical or subcritic..
Estimate the cooling capacity of absorption chiller to be : A gas turbine (can assume an ideal Brayton cycle) has a pressure ratio of 10. It is connected to an electric generator with an efficiency of 95% which produces 300kW of electricity.
Assume an ideal brayton cycle : A gas turbine (can assume an ideal Brayton cycle) has a pressure ratio of 10. It is connected to an electric generator with an efficiency of 95% which produces 200MW of electricity. The gas turbine burns natural gas with a heating value of 100,000 bt..
What is the mass flow rate of steam through the turbine : Consider a small simple Rankine Power cycle which produces 600kW power from an electric generator with an efficiency of 95%. The steam leaves the boiler at 1250psia as superheated steam and leaves the turbine at 2 psia with a quality of 90%.
Vapor compression refrigeration cycle : A vapor compression refrigeration cycle has a theoretical COP of 4.8 and provides 120,000 btu/h of cooling (same as 10 tons of cooling). The compressor is driven by a motor with an efficiency of 92%. Estimate the theoretical kW electrical demand that..
Dam is to be built such that the estimated average flow : The dam is to be built such that the estimated average flow over its crest will be Q = 3000 m^3/s. Determine the required flow over the crest of a model built to a scale of 1/25
What is the entropy generation in the process : A thermodynamicist is attempting to model the process of balloon inflation by assuming that the elastic casing behaves like a spring opposing the expansion as presented in the figure. As air is admitted, the spring is compressed.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The temperature of the gases leaving the compressor

A diesel engine is fitted with a turbocharger that comprises a radial flow compressor driven by a radial flow exhaust gas turbine. The gravimetric air-fuel ratio is 20:1; the air is drawn into the compressor at a pressure of 1 bar and at a temperatur..

  The steel has sy 400mpa determine the safety factor if the

a cylindrical tank with hemispherical ends is required to hold 150 psi of pressurized air at room temperature. the

  Find the magnitude of reactions at a and the tension in rope

A block is L = 1 [m] long and h = 0.5 [m] tall and weighs 50 [N]. The box is allowed to rotate about point A. A rope is attached to the upper left corner. This rope makes a θ=40° angle from the horizon. A horizontal force of 30 [N] is applied at th..

  The 2-lb box has a velocity of 5 fts when it begins to

the 2-lb box has a velocity of 5 fts when it begins to slide down the smooth inclined surface at a. the coordinates of

  Determine the final velocity of each car after all impacts

at an amusement park there are 200-kg bumper cars a b and c that have riders with masses of 40 kg 60 kg and 35 kg

  Applying energy and entropy rate balances evaluate the claim

A heat pump operates at steady state maintains a house at 22 0C when the outside is -22 0C using 15 kW of power. The manufacturer claims that the power input required is 3.2 kW. Applying energy and entropy rate balances evaluate the claim.

  A supersonic aircraft consumes 5320 imperial gallons of

a supersonic aircraft consumes 5320 imperial gallons of kerosene per hour of flight and flies an average of 14 hours

  Determine the engine block surface temperature\

An engine block with a surface area measured to be 0.90m2 generates a power output of 55 kW with a net engine efficiency of 35%. The engine block operates inside a compartment at 157oC and the average convection heat transfer coefficient of 60 W/m..

  Determine value of force when the rod begins to yield solve

a 20-mm diameter rod made of a ductile material with a yield strength of 350 mpa is subjected to torque of 100 n.m and

  Determine the initial volume of the cylinder

A mass of 0.5 g of air is contained in a piston-cylinder device. Initially the system is at 100 kPa and 25°C. The system is now compressed adiabatically to a volume 17 times smaller and a temperature of 700 K.

  Assume that the silicon can be treated as a semi-infinite

silica sio2 is formed on silicon as an electrically insulating layer for microelectronic devices. silica is formed when

  Determine the initial temperature

A frictionless piston-cylinder contains 3.0 kg of H2O and is initially at 300 kPa. The initial volume is 1.0 m3. The water is heated until the temperature is 300 C. If the volume within the system reaches 1.5 m3, the piston hits a set of stops and is..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd