Associated quantities to be expected on the prototype

Assignment Help Mechanical Engineering

Reference no: EM13714041

The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small device attached to the surface measures a shear stress of 0.02 psi at a particular location. Determine the associated quantities to be expected on the prototype if water is the fluid for both cases.

Reference no: EM13714041

Questions Cloud

Second laws of thermodynamics : The data listed below are claimed for power cycles operating between hot and cold reservoirs at 1000 K and 400 K, respectively. For each case determine whether such a cycle is in keeping with the first and second laws of thermodynamics.

Determine the velocity of an airstream in a wind tunnel : The proposed design for anemometer to determine the velocity of an airstream in a wind tunnel is comprised of a thin metallic strip whose ends are supported by stiff rods serving as electrodes for a passage of current used to heat the strip.

A spherical water droplet having a diameter : A spherical water droplet having a diameter of 1.3 mm is allowed to fall from rest in atmospheric air at 1 atm and 20C. Estimate the velocities the duplet will attain after a drop of 30, 60, and 300 m.

Determine the surface temperature of the heated panel : A room has 1000 ft2 of surface, of which 120 ft2 is to be heated, and the balance has an average surface temperature of 60°F. The air temperature in the room is 68°F. The room is occupied by light clothed adults at rest. Determine the surface tempera..

Associated quantities to be expected on the prototype : The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small d..

What is the maximum gas temperature along the duct : An ideal/calorically perfect gas enters a constant-area heater at a Mach number of 0.20, a total pressure of 700 kPa, and a total temp of 500K. A heat interaction of 1030 kJ/kg into the gas occurs. Determine the Mach number, total pressure (kPa), sta..

What will be the thermal efficiency of the cycle : In a thermodynamic cycle consisting of four processes, the heat and work are as follows: Q (kJ): 30, -10, - 20, 65 W (kJ): 3, 10, - 8, 0. What will be the thermal efficiency of the cycle?

Input range of integral and number of sections : Create a sub-function for calculating the equation for given x-values like we did in the lab. Create a sub-function for calculating the integral for each method for the equation and range/section.

Decorative water fountains consist of water reservoir : Decorative water fountains consist of a water reservoir and underground piping to and from a pump. One such system is shown schematically in the figure. The pipe material is PVC(a table is provided). The outlet line from the pump is 18 m and the inle..

User Account

All Pages