Appropriate forms of the energy balance and entropy balances

Assignment Help Mechanical Engineering
Reference no: EM13717434

Superheated steam at 600 C and 4000 kPa is fed into a turbo expander at a rate of 10 kg/s. The steam expands and leaves the expander at 500 kPa pressure and 300 C. It is known that there is a heat loss of 50 kJ/sec. This heat loss can be assumed to take place at a surface temp of 500 C.

a) Write down the appropriate forms of the energy balance and entropy balances for this case.

b) Calculate the work produced per second.

c) Is the expansion reversible? if not calculate the entropy generation per second.

d) If the expansion were reversible, and assuming the same rate of heat loss, what would be the exit temperature if the exit pressure is kept at 500 kPa

Reference no: EM13717434

Questions Cloud

What is the maximum safe speed for the car : On a dry day, a car is approaching flat highway curve. If the highway curve has a radius of a 60 m, What is the maximum safe speed for the car
What is bubble pressure for an equimolar mixture : The system acetone(1) and methanol(2) is well represented by the one parameter Margules equation using A = 0.605 at 50 degrees C. a) What is bubble pressure for an equimolar mixture at 30 C?
Find how many maxima are there in full diffraction pattern : A diffraction grating is made up of slits of width 300 nm with separation 620 nm. How many maxima are there in the full diffraction pattern
What is the coefficient of kinetic friction on the incline : A 3 kg block with an initial velocity of 4.2 slides 25° incline. If the block slides 1.5 m up the incline before coming to rest, What is the coefficient of kinetic friction on the incline
Appropriate forms of the energy balance and entropy balances : Superheated steam at 600 C and 4000 kPa is fed into a turbo expander at a rate of 10 kg/s. The steam expands and leaves the expander at 500 kPa pressure and 300 C. It is known that there is a heat loss of 50 kJ/sec. This heat loss can be assumed to t..
What would be the maximum static charge density : Air is capable of supporting an electric field of about 3 x 106 N/C before a spark occurs. What would be the maximum static charge density you could put onto that cable if air separated the conductors
Dell is selling 30,000 units in europe at an average price : Dell is selling 30,000 units in Europe at an average price of euro1500 per unit. Both the spot and forward exchange rate are $1.20/euro. The cost of each unit in dollars is $1300 per unit. The elasticity of demand for dell computers in Europe ..
Find the octave band sound power level : A forward - curve centrifugal fan has 32 blades and rotates at 3000 rpm. It delivers 5000 cfm of air with a static pressure of 5 in of water. Find the octave band sound power level
Calculate the power generated by the turbine in mw : The mass flow rate through a steam turbine operating under steady conditions is 100 kg/s. Steam enters the turbine at 12 MPa and 400oC. A mixture of vapour and liquid water exits the turbine at 10 kPa. At the exit state 93% of the mass of the water i..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd