User Account

All Pages

Analysis of a health and safety accident

Assignment Help Electrical Engineering
Reference no: EM13308143

A case study analysis of a health and safety accident in the New Zealand workplace. The workplace should be related to your chosen discipline.

The case you select has to be recent. The NZ Herald's archive can be a good starting point for selecting cases.

The written assignment should cover the structure/guidelines below within 1500 words.

1. Introduce the case to be solved - define it and describe it briefly.

2. Analyse all parts of the case

3. Identify different views of the case and /or different attitudes towards the issue (case)

4. Make connections by doing some research into
• what expert critical thinking is on the issue and
• what experts consider the best solution to the issue
• for the above search the internet and / or library, and wherever possible consult related technical staff and other industry professionals

5. Draw conclusions from your research and explain how the evidence researched influenced your judgment.

6. Commit to action. Outline what could be done next as a result of your conclusion. This could be in the form of an action plan, and it could involve further investigation.

The Introduction and Conclusion frame your essay.

The Problem should be significant and described briefly.

The Analysis should be thorough and form the ‘meat' of your essay with research evidence to support your analysis.

Correct referencing is crucial in your essay and adds credibility to the content.

Attachment:- EE_Question.doc

Verified Expert

Reference no: EM13308143

Questions Cloud

Write a class that encapsulates the evolution : Write a class (and a client class to test it) that encapsulates the evolution of the sales tax rates in the 50 U.S states over the last 10 years. Your only instance variable should be a two-dimensional array of values representing the sales tax ra..
What is the ratio of the charge to its initial value : A series RLC circuit contains a 2200 ohm resistor, a 14.0 nF capacitor, and a 0.0300 H inductor. what is the ratio of the charge to its initial value
Write a program that calculates the user''s bmi : Write a program that calculates the user's body mass index (BMI) and categorizes it as underweight, normal, overweight, or obese, based on the following table from the United States Centers for Disease Control
Find the magnitude force on each wire : Three parallel wire 5 m long carry each 24 A of current in the same direction. Find the magnitude force on each wire
Analysis of a health and safety accident : A case study analysis of a health and safety accident in the New Zealand workplace. The workplace should be related to your chosen discipline.
Calculate the deflection v and slope dv by dx as function : For a cantilever beam 20 ft long under a uniformly distributed load of 500 pounds/foot, calculate the deflection v and the slope dv/dx as a function of x by integrating differential equations.
What is the observed scattering angle : a monochromatic beam of x-rays with a wavelength of 0.280 nm is scattered by a metal foil. what is the observed scattering angle
Create a program that will store results of your dice game : Create a program that will store the results of your dice game in a comma separated value file (filename.csv). You will use the Formatter API to construct a new file.
Determine the angular velocity of bar ab at displacement : Slider A moves in the horizontal slot with a constant speed v = 1.90 m/s for a short interval of motion. Determine the angular velocity of bar AB if the displacement xA = 90 mm, and the length L = 440 mm.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Design a 4-bit serial equality comparator using jk flipflop

Design a 4-bit serial equality comparator. That is, if we have a3a2a1a0=b3b2b1b0, then eq=1. Note that a3a2a1a0 is stored at register 1, while b3b2b1b0 is stored at register 2.

  Determine and plot correlation sequence between two signals

Let x[n] = [1,2,3,2,1] with arrow under 3 and y[n] = [2,1,0,-1,-2] with arrow under 0. a) using scanning operation, determine and plot correlation sequence between two signals. b) Determine and plot correlation coefficient.

  Which fet operates in both depletion and enhanced mode

Which FET operates in both Depletion and Enhanced mode and how do you recognize the mode by just looking at the Family of Drain Characteristic Curves

  Calculate the steady-state dc output voltage

Describe the circuit's response to a 4 Vpp sinusoid. Measure its time constant and describe the circuit's response to a 100 Hz, 10 Vpp square wave centred on 0 V.

  What is the value of rth

What is the value of RTH?

  Explain signal-conditioning output

An LVDT is used in an accelerometer to measure seismic-mass displacement. The LVDT and signal-conditioning output is 0.31mV/mm with +/-2cm maximum core displacement.

  Determine the input sequence of voltage

in a balanced three-phase wye system the source is an abc-sequence set of voltage. the load voltage on the a phase is Van= 108.58

  Write down an expression for the voltage waveform

An a.c. voltage, V, comprises of a fundamental voltage of 100 V rms at a frequency of 120 Hz, a 3rd harmonic which is 20% of the fundamental, a 5th harmonic which is 10% of the fundamental and at a phase angle of 1.2

  Draw a timing diagram for an asynchronous sr and clocked sr

Draw a timing diagram for an asynchronous SR, clocked SR and clocked D flip-flops undergoing a setting, resetting and latching (hold) condition.

  Why designer often use signal conditioning amplifier circuit

What are two types of variables that can be used for values that exceed 256, and describe what is the difference between the variables, how to declare them and the memory allocated, and the numerical range for both.

  How do analog filters behave with low and high frequencies

The Integrator and Differentiator appear to behave like analog filters. What kind of filters are they, how do they behave with low and high frequencies

  Explain baseband digital trnamission and multi level coding

Baseband digital trnamission and multi level coding, A baseband digital data link transmits polar binary NRZ current pulses at a rate of 1.0 Msps. The link uses ideal RRC filters with roll off factor r = 0.5.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd