An insulated tank is divided into two parts by a partition

Assignment Help Mechanical Engineering

Reference no: EM13708122

An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated. The partition is now removed, and the water expands to fill the entire tank. the final temperature of the water and the volume of the tank for a final pressure of 10 kPa. Using EES software, investigate the effect of the initial pressure of water on the final temperature in the tank. Let the initial pressure vary from 100 to 600 kPa. Plot the final temperature against the initial pressure, and discuss the results.

Reference no: EM13708122

Questions Cloud

What is the corresponding wall thickness of the container : A parison is extruded from a die with outside diameter = 11.5 mm and inside diameter = 7.5 mm. The observed die swell is 1.25. The parison is used to blow mold a beverage container whose outside diameter = 112 mm (a standard size 2liter soda bottle)...

Plot the final temperature against the initial pressure : An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated. The partition is now removed, and the water expands to fill the entire ..

The inner pipe of a double-pipe heat exchanger : The inner pipe of a double-pipe heat exchanger has an OD of 1.9 in. and contains 36 rectangular fins of the type shown in the sketch below. The fins are made of steel (k=34.9 Btu/h ? ft ? ?F) and are 0.5 in. high and 0.035-in. thick.

Plot the mass of ice against the initial temperature of ice : A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

An insulated tank is divided into two parts by a partition : An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated.

Gas is compressed from a state : A gas is compressed from a state of 15 lbf(in)^2, 0.5ft^3, to a final state of 60 lbf/(in)^2. The process equation relating P and V is P=aV+b, where a=-150 lbf/ft^3. Evaluate the work, in ft-lbf.

Conditioning system to acquire-store an egg bio potential : Design a signal conditioning system to acquire and store an EGG bio potential. The bandwidth of interest is between 6 and 120 Hz and has peak amplitude of approximately +/-10 mV. Calculate the gain required to optimize you data acquisition into an AD..

Running conveyor system problem : A random sample of three bottles is selected from the running conveyor system. When the bottles are inspected, they are either properly labeled or they are not. Rejected bottles are scrapped. The proportion nonconforming is 0.25. What is the probabil..

Insulated piston-cylinder-determine voltage of the soured : An insulated piston-cylinder device contains 7L of saturated liquid water at a constant pressure of 175 kPa. Water is stirred by a paddle wheel while a current of 6.2A flows for 75 min through a resistor placed in the water. If one half of the liquid..

User Account

All Pages