An ideal otto cycle has a compression ratio

Assignment Help Mechanical Engineering

Reference no: EM13719041

An ideal Otto cycle has a compression ratio of 13.5, takes in air at 95kPa and 20°C and is repeated 940 times per minute.

Using constant specific heats at room temperature, determine

A) the thermal efficiency of this cycle

B) the rate of heat input if the cycle is to produce 296 kW of power.

Reference no: EM13719041

Questions Cloud

Constant specific heats at room temperature : An ideal Diesel cycle has a maximum operating temperature of T3= 862 C and a cut off ratio of 1.19. The state of the air at the beginning of the compression is P1 = 96 kPa and T1 = 15 C. This cycle is executed in a four-stroke, eight-cylinder engine ..

What is the isentropic efficiency : 5 lbm per second of saturated water vapor enters an adiabatic compressor at 300oF where it is compressed to 800 psi. If the power input is 2,150 hp, what is the isentropic efficiency?

Heat transferred to the argon during heat-addition process : An ideal Otto cycle with Argon as the working fluid has a compression ratio of 6.8. The minimum and maximum temperatures in the cycle are 450 R and 2,260 R. Assuming constant specifc heats,

How does the author back it up with evidence : What is the main point that the author is trying to make and how does the author back it up with evidence,etc? What evidence is offered?

An ideal otto cycle has a compression ratio : An ideal Otto cycle has a compression ratio of 13.5, takes in air at 95kPa and 20°C and is repeated 940 times per minute. Using constant specific heats at room temperature, determine the thermal efficiency of this cycle

Determine the minimum pressure in the cycle : Consider a Carnot cycle executed in a closed system with air as the working fluid. The maximum pressure in the cycle is 730 kPa while the maximum temperature is 750 K. If the entropy increase during the isothermal heat rejection process is 0.31 kJ/kg..

Air-standard cycle with variable specific heats is executed : An air-standard cycle with variable specific heats is executed in a closed system and is composed of the following four processes: Isentropic compression from 100 kPa and 27 degrees C to 1.11 MPa. P = constant heat addition in amount of 3,020 kJ/kg

Determine the final equilibrium temperature : A container filled with 97 kg of liquid water at 95ºC is placed in a 82-m3 room that is initially at 13ºC and 1 atm. Thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room.

The model of a tidal channel in a coastline study : The model of a tidal channel in a coastline study is scaled to 1/100 of actual size. Fresh water is to be used in place of seawater in the model. Assuming that the Reynolds number must be matched, what model velocity is needed to ensure dynamic simil..

User Account

All Pages