Air is compressed under steady flow conditions see figure

Assignment Help Mechanical Engineering

Reference no: EM13345643

Air is compressed under steady flow conditions, see Figure Q3. The power input to the compressor is 3 kW. During the process the specific heat loss from the compressor is measured to be 20 kJ/kg. The mass flow rate of the air is 0.04 kg/s. The velocity of the air entering the compressor is 3 m/s, and the velocity of the air exiting the compressor is 10 m/s. The compressor outlet is 10 m below the compressor inlet. The specific enthalpy at the compressor inlet is 280.13 kJ/kg.

(a) Calculate the specific enthalpy at the compressor outlet. Include in your calculations the changes in kinetic and potential energy.

(b) Neglect the changes in the kinetic and potential energy and re-calculate the specific enthalpy at the compressor outlet. What effect does this have on your value for the specific enthalpy at the compressor outlet?

(c) If the specific internal energy increases by 39.32 kJ/kg during this process, find the change in temperature of the air between the and outlet of the compressor.h = 280.13 kJ/kg ,h = 280.13 kJ/kg,Inlet Compressor m=0.04kg/s,Power input=3 kW,Outlet h=?Note: You may assume that air is an ideal gas.

Reference no: EM13345643

Questions Cloud

I used the circuit same as on the datasheet cs6422 but in : i used the circuit same as on the datasheet cs6422. but in my case i did not use any of the control pins

What is the broglie wavelength of an electron moving at : what is the broglie wavelength of an electron moving at one-tenth the speed of light. mass of the electron 9.109

The vessel contains 500 moles of hydrogen 200 moles of : three gases hydrogen helium and krypton are confined in a 7.00 l vessel at a pressure of 13.0 atm. the vessel contains

The first order rate constant for a reaction at 700 oc is : the first order rate constant for a reaction at 700 oc is 8.98e-03 s-1. if the activation energy for the reaction is

Air is compressed under steady flow conditions see figure : air is compressed under steady flow conditions see figure q3. the power input to the compressor is 3 kw. during the

Estimate the enthalpy change for the combustion of one mole : estimate the enthalpy change for the combustion of one mole of acetylene c2h2 to form carbon dioxide and water vapor.

Write down the matlab code for knn classification instead : write down the matlab code for knn classification. instead of distance between your data pointsuse cosine similarity

What molar ratio of sodium acetate to acetic acid naachac : what molar ratio of sodium acetate to acetic acid naachac should be used in preparing a buffer having a ph of 4.35? ka

Star-connected capacitor bank is used to correct this power : a load of 300 kw is driven by a 3-phase motor of 0.9 efficiency. the motor has a power factor of 0.7 lagging and is

User Account

All Pages