Air flows at 120degc in a thin-wall stainless-steel tube

Assignment Help Mechanical Engineering

Reference no: EM13626385

Air flows at 120°C in a thin-wall stainless-steel tube with h = 65 W/m2 · °C. The inside diameter of the tube is 2.5 cm and the wall thickness is 0.4 mm. k = 18 W/ m · °C for the steel. The tube is exposed to an environment with h = 6.5 W/m2 ·°C and T8 = 15°C. Calculate the overall heat-transfer coefficient and the heat loss per meter of length. What thickness of an insulation having k = 10 mW/ m · °C should be added to reduce the heat loss by 90 percent?

Reference no: EM13626385

Questions Cloud

During a gust of wind the blades of the windmill are given : during a gust of wind the blades of the windmill are given an angular acceleration of 0.2 rads2 where is measured in

A 228 kg mass connected to a spring completes one : a 2.28 kg mass connected to a spring completes one oscillation every three seconds. the motion has an amplitude of 1.5

Suppose a beam of 50 ev protons strikes a potential energy : suppose a beam of 5.0 ev protons strikes a potential energy barrier of height 6.0 ev and thickness 0.58 nm at a rate

Among 35-40 year olds 39 say they have operated heavy : among 35-40 year olds 39 say they have operated heavy machinery while under the influence of alchol. suppose three

Air flows at 120degc in a thin-wall stainless-steel tube : air flows at 120degc in a thin-wall stainless-steel tube with h 65 wm2 middot degc. the inside diameter of the tube is

Write a function that accepts an array a as input and : write a function that accepts an array a as input and searches the contents of the array for elements in three

An insulation system is to be selected for a furnace wall : an insulation system is to be selected for a furnace wall at l000degc using first a layer of mineral wool blocks

When the spring is loaded vertically with 1 kg weight it is : a spring with a wire diameter of 1mm and 20 turns of radius 10 mm was given to you. the weight of the spring is 4 g.a

A pro golfer can hit a ball at v240 fts and 9000 rpm to : the fluid dynamic characteristics of a golf ball are to be tested using a model in a wind tunnel. the dependent

User Account

All Pages