Determine the change in temperature of the air

Assignment Help Mechanical Engineering

Reference no: EM13719373

A water cooled compressor with air flowing at 0.1 kg/s enters at a temperature of 27C. The compressor work is 5 kW and the heat transfer rate to the water is 2kW. Use air as an ideal gas (Cp = 1.006 kJ/kg-K). Ignore changes in KE and PE.

(d) Determine the change in temperature of the air, in C (7 pts).

(e) If the change in temperature of the water is 10 C and there is no change in the water pressure, determine the flow rate of the water in kg/s., and water as incompressible (Cp = 4.2 kJ/kg-K) (7 pts).

Reference no: EM13719373

Questions Cloud

Discuss symmetric and asymmetric key encryption : A short introduction to SSH, explaining why it is the preferredway of logging into a remotemachine-this explanation will need to discuss symmetric and asymmetric key encryption.

What is the growth rate : Submit a 4- to 5-page paper that addresses the following questions. Be sure to use references within the paper to support your answers. Show work for all calculations. 1. (a.) Suppose real GDP was $13.1 trillion in 2013 and $13.3 in 2014, what..

State the first law and indicate what terms will drop out : Water with a specific volume of 0.001 m3/kg flows through a pipe at 5 kg/sec entering the pipe with an initial velocity of 100 m/sec and exiting at 50 m/sec. The exit of the pipe is 100 m above the inlet. The pipe is well insulated and the power requ..

Explain how it affects the purchase process : Describe the model of consumer buyer behavior. Providing a list of the steps or a graphic of the model is not adequate, as you must explain how the process works in the real world using your own words.

Determine the change in temperature of the air : A water cooled compressor with air flowing at 0.1 kg/s enters at a temperature of 27C. The compressor work is 5 kW and the heat transfer rate to the water is 2kW. Use air as an ideal gas (Cp = 1.006 kJ/kg-K). Ignore changes in KE and PE.

Determine exit temperature of air-rate of entropy production : Air enters the evaporator section of an air-conditioner at 100 kPa, 27oC with a volumetric flow rate of 6 m3 /min. R-134a enters the evaporator at 120 kPa with a quality of 0.3 and rate of 2 kg/min and it leaves as a saturated vapor at the same press..

Determine the axial loads : Determine the axial loads in the stiffeners and the shear flow in each of the skin panels

Graphically demonstrate the inefficiency : Graphically demonstrate the inefficiency that occurs when sports teams produce external benefits. How will a subsidy remedy this problem?

Evaluate the potential for benchmarking of energy : Identify background information of why you chose the particular organisation as it relates to your understanding of managing energy sources

User Account

All Pages