A worker-machine operation was found to involve

Assignment Help Operation Management

Reference no: EM1382704

A worker-machine operation was found to involve 3.6 minutes of machine time per cycle in the course of 40 cycles of stopwatch study. The worker's time averaged 2.5 minutes per cycle, and the worker was given a rating of 120 percent (machine rating is 100 percent). Midway through the study, the worker took a 10-minute rest break. Assuming an allowance factor of 12 percent of work time, determine the standard time for this job.

Reference no: EM1382704

Questions Cloud

Illustrate what rules of procedure will the court use : Illustrate what rules of procedure will the court use? Elucidate why? Illustrate what rules of substantive law will the court use?

Terrorism briefing and notes : The chief of police calls the local college president of well-respected university, asking for overview briefing on terrorism to be conducted at the university.

Principal stresses and the orientation of planes : A direct shear test is performed on a saturated specimen of loose sand. A normal stress equal to 100 kPa is applied and a maximum shear stress of 75 kPa is measured in the shear test. Determine the principal stresses and the orientation of these p..

Explain the structure of water : A molecular level description means that you must explain the structure of water and how that structure leads to the observation made- in this case that water beads on waxes.

A worker-machine operation was found to involve : A worker-machine operation was found to involve 3.6 minutes of machine time per cycle in the course of 40 cycles of stopwatch study. The worker's time averaged 2.5 minutes per cycle

Elucidate how would you advise him : At American Heartland, we hire only American citizens. Jose is considering suing under Title VII. Elucidate how would you advise him.

Determine the effective coefficient of linear expansion : A composite bar made from two different materials of equal cross-sectional areas are directly attached to each other making the bar a length of L = L1 + L2.

What are examples of questionable payments in industry : What are examples of questionable payments in industry? If these questionable payments are part of the culture, are they now acceptable behavior for MNCs

Pore water pressure at failure : A CU triaxial test with σc = 20 psi is performed on a sand and a deviator stress of 80 psi fails the specimen. Previous tests revealed that the effective friction angle for this sand is 35°. Calculate the pore water pressure at failure.

User Account

All Pages