A vehicle pulls out onto a single lane highway that has a

Assignment Help Civil Engineering
Reference no: EM13384177

A vehicle pulls out onto a single lane highway that has a flow rate of 280 veh/hr (poisson distributed). The driver of the vehicle does not look for oncoming traffic. Road conditions and vehicle speeds on the highway are such that it takes 1.5 seconds for an oncoming vehicle to stop once the brakes are applied. Assuming a standard driver reaction time of 2.5 seconds, what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?

Reference no: EM13384177

Questions Cloud

Ammonia nh3 kb 18 x 10-5 is added to 100 ml of water at : ammonia nh3 kb 1.8 x 10-5 is added to 100 ml of water at room temperature. the vapor pressure of the water above the
If the height of the mercury column in the leveling bulb : if the height of the mercury column in the leveling bulb is 30 mm greater than that in the gas buret and atmospheric
A 184-mg sample of na2co3 is dissolved in h2o to give 300l : a 184-mg sample of na2co3 is dissolved in h2o to give 3.00l of solution.nbsp what is the concentration of na in parts
The number of moles in 452 grams of naclo4 the number and : the number of moles in .452 grams of naclo4 the number and type of particle in .452 grams of naclo4 is it possible for
A vehicle pulls out onto a single lane highway that has a : a vehicle pulls out onto a single lane highway that has a flow rate of 280 vehhr poisson distributed. the driver of the
Ferrophosphorus fe2p reacts with pyrite fes2 producing : ferrophosphorus fe2p reacts with pyrite fes2 producing ironii sulfide and a compound that is 27.67 p and 72.13 s by
A copper refinery produces a copper ingot weighing 75 kg : a copper refinery produces a copper ingot weighing 75 kg. the density of the copper is 8.94 gcm3. if the copper is
It the acetylene was collected over water at 17 celcius and : a 3.25 g sample of solid calcium carbide reacted with water to produce acetylene gas and aqueaous calcium hydroxide. it
Determine the number of moles of o2 produced by the : 2 naclo3 -gt 2 nacl 3 o2determine the number of moles of o2 produced by the decomposition of 639 g of

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the compacted cubic yards per hour with a drum

Calculate the compacted cubic yards per hour if a compactor with a 5-ft drum width travels at 3 mph over a 10-in. lift of aggregate base course with 4 passes required to meet density specifications under average operating conditions.

  What is the optimal distance between the two drainage canals

To avoid the salinization of soil in a farming area, parallel drainage canals are to be installed to maintain the water table at a depth of at least 4m below the ground surface. It is thought that no evapo-transpiration would occur below that dept..

  Determining the pumping rate

Determine the required pumping rate. the aquifer has T= 1600 m 2 /day and the wells each have radius of influence of 600m.

  How much distance must be cleared from the center of lane

If the superelevation is .10 at the station of the PC is 17+35, what is the station of the PI and how much distance must be cleared from the center of the lane to provide adequate stopping sight distance

  Determine the strains in each of the transveral axes

A 12inx1inx3in ASTM 36 steel bar is loaded with an axial load of 90,000lbs and a transversal load of 288,000lbs (force applied perpendicular to the 1in side) The proportionality limit is 34,000psi.

  What error in pressure drop would ensue if assumptions made

horizontal pipe, and the fanning friction factor is f_F = 0.0060. what error in the pressure drop would ensue if the assumption were made that the flow was laminar, abandoning the previous value of the friction factor.

  What are the reasons for organisms that have mercury

What is (are) the reason(s) for organisms that have mercury concentrations different than what is predicted to occur just by bioconcentration

  What is the maximum that each of these 2 equal loads can be

The beam has an allowable flexural stress of 9 MPa and a much lower allowable shear stress parallel to the grain of 850 kPa. What is the maximum that each of these 2 equal loads can be

  Estimate the theoretical production of landfill gas

estimate the theoretical production of landfill gas (CH4 only) from the degradation of 20.3 kg of rapidly decomposable MSW. asssume the density of methane is 0.7177 kg/m^3.

  Find the water depth must be three-quarters of the width

A channel of a rectangular section is to take a certain discharge Q at critical flow; prove that for the wetted perimeter, P=b+2y to be minimum, the water depth must be three-quarters of the width

  What is the probability that if purchased car is better

An automobile that you are looking at purchasing has an advertised fuel mileage of 30 miles per gallon. You rent the car for a week and track your mileage to school and back home and get (miles/gallon)

  What is the total head 5m below the river bed

Consider again the scenario above. Assume the water is static. Assume a datum at the water surface. a) What is the total head 5.0m below the river bed b) What is the pore water pressure at that level

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd