A three-axis pick-and-place application requires

Reference no: EM131127161

The system of Advanced Problem AP10.1 is to have a percent overshoot less than 13%. In addition, we desire that the steady-state error for a unit ramp input will be less than 0.125 (K_v = 8) [24]. Design a lag network to meet the specifications. Check the resulting percent overshoot and settling time (with a 2% criterion) for the design.

Problem AP10.1

A three-axis pick-and-place application requires the precise movement of a robotic arm in three dimensional space, as shown in Figure AP10.1 for joint 2. The arm has specific linear paths it must follow to avoid other pieces of machinery. The overshoot for a step input should be less than 13%.

(a) Let G_c(s) = K, and determine the gain K that satisfies the requirement. Determine the resulting settling time (with a 2% criterion), (b) Use a lead network and reduce the settling time to less than 3 seconds.

Reference no: EM131127161

Questions Cloud

Percent overshoot of the closed-loop system response : Plot the percent overshoot of the closed-loop system response to a unit step input for K in the range 0 ≤ 100. Explain the behavior of the system response for K in the range 0.129 ≤ 69.872.

How fast the ball is moving : When the ball is accelerating at -0.64m/s^2, how fast is is moving?

Discuss advantages and disadvantages of the categorization : Discuss the advantages and disadvantages of the Categorization and Interest-Based Bargaining (IBB) Methods and which method you would be more likely to use in a negotiating situation and why.

Precise movement of a robotic arm in three dimensional space : A three-axis pick-and-place application requires the precise movement of a robotic arm in three dimensional space, as shown in Figure AP10.1 for joint 2. The arm has specific linear paths it must follow to avoid other pieces of machinery. The ove..

A three-axis pick-and-place application requires : The system of Advanced Problem AP10.1 is to have a percent overshoot less than 13%. In addition, we desire that the steady-state error for a unit ramp input will be less than 0.125 (Kv = 8) [24].

Identify four of the most important ksas a training program : A major influence on job performance is motivation. There are several theories explaining the concept of motivation (expectancy theory, ERG theory, reinforcement theory, etc.). Select one of the following three scenarios to use as a framework for ..

A three-axis pick-and-place application requires : The system of Advanced Problem AP 10.1 is required to have a percent overshoot less than 13% with a steady state error for a unit ramp input less than 0.125(Kv = 8). Design a proportional plus integral (PI) controller to meet the specifications.

A dc motor control system with unity feedback : A DC motor control system with unity feedback has the form shown in Figure AP10.4. Select K1 and K2 so that the system response has a settling time (with a 2% criterion) less than 1 second and an overshoot less than 5% for a step input.

What is the torino scale for asteroids : What is the Torino Scale for asteroids? In this context, what is significant about the orbit of the asteroid Apophis

User Account

All Pages